Release notes for v2.5.8-pre3 Summary of changes from v2.5.8-pre2 to v2.5.8-pre3 ============================================ (02/02/20 1.370) rework kernel stack usage remove old ioctls (02/02/21 1.372) ppc64: update for pte in highmem changes (02/03/11 1.375) ppc64: remove high2lowuid. ppc64: remove schedule() after set_cpus_allowed() (02/03/11 1.376) ppc64: remove task migration IPI, add xmon IPI (02/03/11 1.377) ppc64: remove per cpu rtas lock for the moment (02/03/11 1.379) ppc64: add SI_DETHREAD (02/03/11 1.380) ppc64: add per cpu section (02/03/11 1.381) ppc64: add large page bit, use lwsync instead of eieio for spinlock release. (02/03/11 1.382) ppc64: stage 1 of hash_page/flush_hash_page rewrite - only random cleanups (02/03/11 1.383) ppc64: hash_page/flush_hash_page rewrite: no need to check for hpte in all slots any more. (02/03/11 1.384) ppc64: hash_page/flush_hash_page rewrite: reformatting (02/03/12 1.385) ppc64: remove old debug code (02/03/12 1.386) ppc64: dont need the hash table lock to check linux pte flags, also ptep is never NULL now. (02/03/12 1.387) ppc64: move permissions check outside of hash table lock (02/03/12 1.388) ppc64: remove code to check all slots for a hpte, we always insert this information into the linux pte (02/03/12 1.389) ppc64: hash_page whitespace and comment changes (02/03/15 1.393) ppc64: updates for 2.5.7-pre1 - futexes, (02/03/16 1.395) ppc64: Alignment handler fixes - from Mike Corrigan (02/03/16 1.396) ppc64: Add halt option to xmon, from Peter Bergner (02/03/16 1.397) ppc64: Add input layer and fix for old yaboot. (02/03/16 1.398) ppc64: rework idle loop, separate iSeries and pSeries (02/03/16 1.399) ppc64: Add RTAS NVRAM driver, from Todd Inglett (02/03/16 1.400) ppc64: remove old pmac NVRAM code (02/03/16 1.401) ppc64: xics fix from Don Reed (02/03/16 1.402) rework ISA bridge probe and use, from Todd Inglett (02/03/16 1.404) ppc64: updates for 2.5.7-pre2 (02/03/25 1.407) ppc64: remove -fno-builtin from Makefile and add -mtraceback=full to enable traceback tables on new gcc (02/03/25 1.408) ppc64: Allocate the first segment separately (02/03/25 1.409) ppc64: cacheline align each XICS IPI bitmask. (02/03/25 1.410) ppc64 power4 SLB optimisations: set the class bit for kernel segments. preload all 16 segments for 32 bit tasks, pc and sp segments for 64 bit tasks. add commented out code to only invalidate 16 user segments for 32 bit tasks, we need to pass in the previous task to use this. (02/03/25 1.411) ppc64: add non context synchronising version of mtmsrd (02/03/25 1.412) ppc64: increase LMB regions (02/03/25 1.413) ppc64: missed modifications for power4 SLB optimisations (02/03/25 1.414) ppc64: thread.pgdir not required any more (02/03/25 1.415) ppc64: hashtable management rework for SMP scalability get rid of global lock on hpte insert and remove, use a software bit for pSeries and the relevant interfaces for pSeries LPAR to avoid races. preload hpte entries in update_mmu_cache. keep cpu_vm_mask and use tlbiel when mm has only run locally batch tlb flushes where possible. add large page support in preparation for generic large page support. Remove HPTENOIX, we always put slot information into linux ptes now. Note: pSeries and pSeries LPAR so far, iSeries coming next. (02/03/25 1.416) ppc64: remove warnings (02/03/25 1.417) ppc64: LMB fixes from Peter Bergner (02/03/26 1.418) ppc64: iSeries updates from iSeries team ppc64: time updates from Mike Corrigan ppc64: add flush_hash_range for pSeries LPAR ppc64: align syscall tables to 8 bytes (02/03/28 1.419) ppc64: pSeries LPAR updates - add hpte_remove (02/03/28 1.369.82.1) Fix spacing in arch/ppc/config.in (02/03/28 1.369.82.2) Add more help texts. (02/03/29 1.369.82.3) Fix exporting of consistent_{alloc,free,sync} on PPC8xx/4xx. (02/03/29 1.369.82.4) Change p_pptr to parent in arch/ppc/kernel/signal.c (02/04/05 1.369.1.215) Cset exclude: davej@suse.de|ChangeSet|20020404222348|23820 (02/04/05 1.369.1.216) [PATCH] loop deadlock fix This chunk is present in 2.4, missing in 2.5. It stops the loop thread from waiting on its owm buffers. (02/04/06 1.369.1.217) ACPI interpreter update. add support for GPE fields to be in any address space, not just IO. comment and debug print cleanups (02/04/06 1.369.1.218) ACPI driver updates Better IRQ routing ACPI 2.0-enumerated processor perf state support ACPI poweroff via magic sysrq (02/04/06 1.369.1.219) MADT parsing improvements (Paul D & Richard Schaal) ACPI PCI IRQ improvements (Dominik Brodowski and Paul D) Wakeup fix (Pavel Machek) (02/04/06 1.369.103.1) Update for new notify_change semantics (02/04/06 1.369.103.2) [PATCH] ->setattr() locking changes ext3 was missed - the removal of the BKL in notify_change means that the filesytem fails quite quickly on SMP in -pre2. Sorry, I should have spotted that when the patch floated past. (02/04/06 1.369.103.3) [PATCH] IEEE-1394 Updates ieee1394 updates: - New drivers: eth1394, admtp - nodemgr cleanup - Fixes for ohci - fixed for node probes - small misc performance fixes - New /proc interface for subsystem, node listing, and dv1394 (02/04/06 1.369.104.1) [PATCH] ->setattr() locking changes Take ->i_sem in all callers of notify_change(). (02/04/06 1.369.105.1) USB usbnet driver update - adds ethtool support (based on code from Brad Hards) - makes diagnostic level configurable (ethtool, module param) - fixes a minor mem_flags goof (thanks Oliver!) - device identifers now use devpath (stable ID) not devnum (02/04/06 1.369.105.2) USB spilt up the Config.help file into smaller pieces (02/04/08 1.422) ppc64: update include/asm-ppc64/linux_logo.h (02/04/08 1.423) ppc64: add preempt_count (02/04/08 1.424) ppc64: Change MASK -> __MASK to avoid namespace clash in symbios driver and fix up thread_saved_pc (02/04/08 1.425) ppc64: Fix up warning (02/04/08 1.426) ppc64: fix up some warnings (02/04/08 1.427) ppc64: Fix up clash with flags variable in udbg.c (02/04/08 1.428) ppc64: fix up warnings in lmb.c (02/04/08 1.429) ppc64: add missing include in semaphore.c (02/04/08 1.430) ppc64: Fix up some warnings in the pagetable allocation code (02/04/08 1.431) ppc64: pmd_page fixes to match pagetable allocation changes (02/04/08 1.432) ppc64: get rid of cacheable_memzero (02/04/08 1.433) ppc64: remove strtok (02/04/08 1.434) ppc64: remove bcopy and cacheable_memcpy (02/04/08 1.435) ppc64: remove unnecessary .text directive (02/04/08 1.436) ppc64: fix warning in rtasd.c (02/04/08 1.437) ppc64: create cacheflush.h and tlbflush.h ppc64: remove local_flush_* functions, just define them directly (02/04/08 1.369.106.2) PPC update; create cacheflush.h and tlbflush.h and define default_idle (02/04/08 1.369.107.1) Make cond_syscall per arch. This is required on some architectures (eg ppc64) where foo points to a function descriptor and .foo is the address of the actual function. (02/04/08 1.438) replace flush_tlb_all with flush_tlb_kernel_range which allows optimisations on some architectures. (02/04/08 1.369.105.3) [PATCH] uhci.c SMP deadlock This patch fixes a bug reported by Greg and David, as well as some other people recently. uhci.c would call wait_ms, which can sleep, with spinlocks held. There are two places where this happens, but only one was the cause of the problem. (02/04/08 1.369.105.4) [PATCH] uhci.c cleanup This patch merely cleans up the code a little and doesn't fix any bugs. It makes a couple of code paths a bit easier to understand, removes an unused variable (uhci_list) and some procfs variables when not using procfs. (02/04/08 1.369.105.5) [PATCH] uhci.c incorrect locking This fixes a problem that I've not run into and is difficult to trigger, but definately a bug. We locked urb->lock, when we meant u->lock. It also cleans up the code a little to make it easier to understand and removes an obsolete comment. (02/04/08 1.369.105.6) [PATCH] uhci.c FSBR speed problem The dangers of not ensuring important fields are properly set. Some, if not all, of the speed problems with uhci.c were caused because some important fields were not set and as a result, FSBR was never turned on. This patch also ensures is_suspended is set to 0 properly. This could cause some problems suspending the HC when no devices are plugged in. (02/04/08 1.369.105.7) changed direct access of current->state to set_current_state() call. Thanks to Paul Komkoff for reminding me of this. (02/04/08 1.369.1.221) [PATCH] ACPI compile fix Hi Linus, Oops, SMP non-ACPI doesn't compile with the previous ACPI update. This fixes that. (02/04/08 1.369.1.222) [PATCH] disable high mem on pio, ide ide-dma incorrectly only clears high memory support if the verbose dma disabling is called, it should clear it for the non-verbose too. (02/04/08 1.369.105.8) [PATCH] page limit on bulk transfers in usbfs? Here is an updated patch using kmalloc that removes the page limit on bulk transfers in usbfs. I've tested it and it seems to work OK. (02/04/08 1.369.105.9) [PATCH] usbfs disconnect This was originally created by David many months ago and posted to the list, but not put into the kernel. I modified the original patch to: -patch against the 2.5.7 kernel -use the 'real' interface number, not position (to do this I added 2 methods in usb.c) (02/04/08 1.369.105.10) USB bluetooth tty driver renamed the bluetooth.c file to bluettty.c to help prevent user confusion between this driver and the bluez bluetooth stack in the kernel. (02/04/08 1.441) [PATCH] missing includes in seq_file.h include/linux/seq_file.h uses memcpy and struct semaphore and so should include the relevant files. (02/04/08 1.442) [PATCH] fix busy loop in migration thread init Since we do not set the task state to TASK_INTERRUPTIBLE, we busy loop. On larger SMP this can actually result in a lockup due to the way migration thread initalisation is done (nr_cpus threads are created and they all busy loop until the scheduler evenly distributes them, one on each cpu. With this rogue thread busy looping things can become unbalanced and the migration threads never distribute themselves onto all cpus). (02/04/08 1.443) [PATCH] missing include in fs/nfsd/nfsctl.c We forgot to include linux/init.h in fs/nfsd/nfsctl.c. (02/04/08 1.444) [PATCH] increase dynamic proc entries for ppc64 Unfortunately the proc filesystem has a limit on the number of dynamic proc entries it can create. On large systems we can exhaust the default (4096) very quickly. The following patch increases the default to something more reasonable. (02/04/08 1.445) [PATCH] size_in_bytes It is a step on the road to removal of the arrays. It also solves other things, like the fact that Linux is unable to read the last sector of a disk or partition with an odd number of sectors. (02/04/08 1.446) [PATCH] Clean up x86 interrupt entry code This patch moves the generation of the asm interrupt entry stubs from i8259.c to entry.S. This allows it to be done with less code and without needing duplicate definitions of SAVE_ALL, GET_CURRENT, etc. (02/04/08 1.447) [PATCH] devfs patch for 2.5.8-pre2 - Documentation updates - BKL removal (devfs doesn't need the BKL) - Changed to allow later additions if not yet empty - Added calls to in drivers/block/blkpc.c and - Bug fixes in unique number and devnum allocators. (02/04/08 1.369.105.11) USB kerneldoc fixes This fixes some kerneldoc bugs for USB. It catches up with the recent rename, and includes a couple minor tweaks/fixes I happened to notice. (02/04/08 1.369.105.12) This patch is a more complete fix for the device refcount sanity checking and cleanup on device disconnect. - Splits apart usb_dec_dev_use(), for driver use, and usb_free_dev(), for hub/hcd use. Both now have kerneldoc, and will BUG() if the refcount and the device tree get out of sync. (Except for cleanup of root hub init errors, refcount must go to zero only at the instant disconnect processing completes.) - More usbcore-internal function declarations are now moved out of into hcd.h - Driver-accessible refcounting is now inlined; minor code shrinkage, it's using atomic inc/dec instructions not function calls. (02/04/08 1.369.105.13) USB cleaned up the comments to put them in proper docbook format. (02/04/09 1.449) [PATCH] 2.5.8-pre2 IDE 29b - Eliminate the mate member of the ata_channel structure. The information provided by it is already present. This patch may have undesirable effects on the ns87415.c and trm290.c host chip drivers, but it's worth for structural reasons to have it. - Kill unused code, which was "fixing" interrupt routing from ide-pci.c Don't pass any "mate" between the functions there. - Don't define SUPPORT_VLB_SYNC unconditionally in ide-taskfile.c - Apply Vojtech Pavliks fix for piix host-chip driver crashes. - Add linux/types.h to ide-pnp.c. - Apply latest sis5513 host chip driver patch from by Lionel Bouton by hand. - Apply patch by Paul Macerras for power-mac. - Try to make the ns87415 driver a bit more reentrant. (02/04/09 1.447.1.1) [PATCH] 2.5.8-pre2 i8xx series chipsets patches i810_rng: add support for other i8xx chipsets to the Random Number Generator module. This is being done by adding the detection of the 82801BA(M) and 82801CA(M) I/O Controller Hub's. (02/04/09 1.451) update x86 defconfig for USB changes (02/04/09 1.452) [PATCH] set-bit cleanup I: x86_capability. Cosmetic change: x86_capability. Makes it an unsigned long, and removes the gratuitous & operators (it is already an array). These produce warnings when set_bit() etc. takes an unsigned long * instead of a void *. Originally from Rusty Russell (02/04/09 1.453) [PATCH] per-cpu cleanup As per David Mosberger's request, splits into per-arch files (solves the #include mess), and fixes my "was not an lvalue" bug. (02/04/09 1.454) [PATCH] open_namei cleanup, nfsctl permission check fix a) part of open_namei() done after we'd found vfsmount/dentry of the object we want to open had been split into a helper - may_open(). b) do_open() in fs/nfsctl.c didn't do any permission checks on the nfsd file it was opening - sudden idiocy attack on my part (I missed the fact that dentry_open() doesn't do permission checks - open_namei() does). Fixed by adding obvious may_open() calls. (02/04/09 1.455) Update kernel version (02/04/09 1.456) [PATCH] cpu affinity syscalls This patch implements the following calls to set and retrieve a task's CPU affinity: int sched_setaffinity(pid_t pid, unsigned int len, unsigned long *new_mask_ptr) int ched_getaffinity(pid_t pid, unsigned int len, unsigned long *user_mask_ptr) Summary of changes from v2.5.8-pre1 to v2.5.8-pre2 ============================================ (02/03/13 1.369.58.1) [PATCH] 1054/1: Fixes security problem with static i/o mapping. For 2.5.x only. (Patch 1042/1 is for 2.4.x) (replaces patch 1041/1.) Christopher Hoover mailto:ch@murgatroid.com mailto:ch@hpl.hp.com (02/03/13 1.369.58.2) [PATCH] 964/1: Consus led patches +++ linux/arch/arm/mach-sa1100/leds.c Wed Feb 13 13:55:33 2002 +++ linux/arch/arm/mach-sa1100/leds.h Wed Feb 13 13:55:52 2002 +++ linux/include/asm-arm/leds.h Wed Feb 13 13:01:31 2002 Additions for consus_leds_event (parallels assabet_leds_event). Added led_start_time_mode and led_stop_timer_mode for heartbeat led. Added led_blue_on and led_blue_off for Blue led support. (02/03/13 1.369.54.2) Miscellaneous compiler warning fixes, other small fixes and cleanups for ARM. (02/03/13 1.369.54.4) Fix scope of init/exit functions in ds1620.c NetWinder flash driver should use ioremap, not the private __ioremap. (02/03/13 1.369.54.5) Update ARM related video drivers: - cyber2000fb - sa1100fb Add new ARM video drivers: - anakinfb - clps711xfb (02/03/17 1.369.1.157) SA1100 IrDA driver updates. (02/03/19 1.369.1.159) Convert ARM92x/ARM1020 specific configuration symbols to generic CPU symbols. Remove unused flush_page_to_ram in ARM code. (02/03/22 1.369.58.3) [PATCH] 1079/1: recognize PXA250 revision B0 and hier (02/03/22 1.369.58.4) [PATCH] 1080/1: Addition of new files for the Intel PXA250/210 architecture This only populates the linux/arch/arm/mach-pxa directory. (02/03/22 1.369.58.5) [PATCH] 1081/1: addition of new header files for the Intel PXA250/210 architecture This patch populates the linux/include/asm-arm/arch-pxa directory. (02/03/22 1.369.58.6) [PATCH] 1082/1: changes to linux/arch/arm/kernel/* for PXA architecture Actually only debug.S and entry-armv.S (02/03/22 1.369.58.7) [PATCH] 1083/1: 64-bit unsigned modulo arithmetic support I've added support for 64-bit modulo arithmetic on ARM. This is needed for the video4linux API to function properly and since there's already support for 64-bit divides, I think there shouldn't be any reason for the absence of this. (02/03/23 1.369.58.8) [PATCH] 1092/1: Avoid unbalanced IRQ from LCD on SA1100 Remove "enable_irq(IRQ_LCD)" call from video/sa1100fb.c (02/03/24 1.369.58.9) [PATCH] 1094/1: 2.4.18-rmk3: fix for build failure with no video 2.4.18-rmk3 fails to build on the EBSA285 if there is no video stuff enabled with a missing symbol. For me the linker lied and told me it was in irq.c but it was actually in the previous file in the link, mach-footbridge/arch.c ; the symbol is screen_info which is what the ORIG_* macros use. Note I haven't yet tested this booting, just building. (02/03/24 1.369.1.160) Miscellaneous build corrections/warning fixes. (02/03/25 1.369.80.1) Break an include loop by moving cache flushing routines from asm/pgtable.h and/or asm/pgalloc.h to asm/cacheflush.h, and tlb flushing routines to asm/tlbflush.h. (02/03/26 1.369.81.1) Add concept of system bus, so system devices (CPUs, PICs, etc) can have a common home in the device tree. Add helper functions for {un,}registering. (02/03/26 1.369.81.2) Ok, really add drivers/base/sys.c (02/03/26 1.369.81.3) Driver model update: Create global list in which all devices are inserted. Done by Kai Germaschewski. (02/03/26 1.369.81.4) Add device_{suspend,resume,shutdown} calls. (02/03/28 1.369.1.162) Miscellaneous build/bug fixes. (02/04/01 1.369.83.1) Fix the kernel build when we have multi-part objects both in $(obj-y) and $(obj-m). Before, we would have built (though not linked) the individual objects for multi-part modules even when building vmlinux and vice versa. (02/04/03 1.369.76.39) Tigon3 driver pci_unmap_foo changes were half complete, fix things up. Noted by Jeff Garzik. (02/04/03 1.369.91.1) kernel/time.c needs linux/errno.h (02/04/03 1.369.91.2) drivers/usb/hub.c needs linux/errno.h (02/04/03 1.369.91.3) drivers/media/video/videodev.c needs linux/slab.h (02/04/03 1.369.92.1) sparc64/kernel/semaphore.c needs errno.h add forward decl of struct page to asm-sparc64/pgtable.h (02/04/03 1.369.92.2) sparc64/kernel/binfmt_elf32.c:ELF_CORE_COPY_REGS needs final semi-colon. (02/04/03 1.369.92.3) sparc64/math-emu/math.c needs linux/errno.h (02/04/03 1.369.93.1) Update pcnet_cs net driver for recent removal of rmem_{start,end} from struct net_device. (actually, for this driver, the functionality was simply moved to 8390.h) (02/04/04 1.369.95.2) Remove unused references to dev->rmem_{start,end} from wavelan_cs net driver. (02/04/04 1.369.95.3) olympic tokenring driver compile fix (02/04/04 1.369.95.4) Add missing MODULE_LICENSE tags to several net drivers. Also... surprise! Andrew Morton's aic7xxx build fix is also included. Ah well, 1001 people probably applied the same patch by hand, and it's easy to merge, so oh well. (02/04/04 1.369.95.5) Merge ioc3-eth net drvr changes from 2.4.x: - Improved MAC address discovery. - endian fixes (02/04/04 1.369.95.6) Merge gt96100 mips net drvr updates from 2.4.x: * Moved to 2.4.14, ppopov@mvista.com. Modified driver to add proper gt96100A support. * Moved eth port 0 to irq 3 (mapped to GT_SERINT0 on EV96100A) in order for both ports to work. Also cleaned up boot option support (mac address string parsing), fleshed out gt96100_cleanup_module(), and other general code cleanups . (02/04/04 1.369.95.7) Merge au1000_eth net drvr updates from 2.4.x: * add support for LSI 10/100 phy * other minor cleanups (02/04/04 1.369.95.8) com20020 arcnet drvr build fix (add missing comma) (02/04/04 1.369.95.9) Merge ariadne2 net drvr updates from 2.4.x: * use Zorro-specific z_{read,write}[bwl] routines * remove superfluous include (02/04/04 1.369.95.10) Merge a2065 net drvr update from 2.4.x: * make sure to stop chip before enabling interrupt via request_irq (02/04/04 1.369.96.1) IrDA: Fix w83977af_ir FIR drivers for new DMA API (02/04/04 1.369.96.2) IrDA trivial fixes: o [CORRECT] Handle signals while IrSock is blocked on Tx o [CORRECT] Fix race condition in LAP when receiving with pf bit o [CRITICA] Prevent queuing Tx data before IrComm is ready o [FEATURE] Warn user of common misuse of IrLPT (02/04/04 1.369.96.3) IrDA: Allow tuning of Max Tx MTU to workaround spec contradiction (02/04/04 1.369.96.4) IrDA: Correct fix for IrNET disconnect indication : if socket is not connected, don't hangup, to allow passive operation (02/04/04 1.369.96.5) IrDA discovery fixes: o [FEATURE] Propagate mode of discovery to higher protocols o [CORRECT] Disable passive discovery in ircomm and irlan Prevent client and server to simultaneously connect to each other o [CORRECT] Force expiry of discovery log on LAP disconnect (02/04/04 1.369.96.6) IrDA USB disconnect changes: o [CRITICA] Fix race condition between disconnect and the rest o [CRITICA] Force synchronous unlink of URBs in disconnect o [CRITICA] Cleanup instance if disconnect before close o [CRITICA] Call usb_submit_urb() with GPF_ATOMIC (02/04/04 1.369.96.7) IrDA: handle new NSC chip variant (02/04/04 1.369.96.8) IrDA: Correct location of dev tx stats update (02/04/04 1.369.95.11) Merge hydra net drvr conversion to Zorro-specific z_{read,write}[bwl] routines from 2.4.x. (02/04/04 1.369.97.1) This fixes the "i_blocks went wrong when the disk filled up" problem. In ext3_new_block() we increment i_blocks early, so the quota operation can be performed outside lock_super(). But if the block allocation ends up failing, we forget to undo the allocation. This is not a serious bug, and probably does not warrant an upgrade for production machines. Its effects are: 1) errors are generated from e2fsck and 2) users could appear to be over quota when they really aren't. The patch undoes the accounting operation if the allocation ends up failing. (02/04/04 1.369.95.12) Merge some new PCI ids from e100 to eepro100 net driver. (02/04/04 1.369.95.13) Various minor bug fixes for 3c59x net driver. (02/04/04 1.369.95.14) Fix jiffies-comparison timeout bug in arlan net driver. (02/04/04 1.369.97.2) Andrew Morton's ext2 sync mount speedup. Description: At present, when mounted synchronously or with `chattr +S' in effect, ext2 syncs the indirect blocks for every new block when extending a file. This is not necessary, because a sync is performed on the way out of generic_file_write(). This will pick up all necessary data from inode->i_dirty_buffers and inode->i_dirty_data_buffers, and is sufficient. The patch removes all the syncing of indirect blocks. On a non-write-caching scsi disk, an untar of the util-linux tarball runs three times faster. Writing a 100 megabyte file in one megabyte chunks speeds up ten times. The patch also removes the intermediate indirect block syncing on the truncate() path. Instead, we sync the indirects at a single place, via inode->i_dirty_buffers. This not only means that the writes (may) cluster better. It means that we perform much, much less actual I/O during truncate, because most or all of the indirects will no longer be needed for the file, and will be invalidated. fsync() and msync() still work correctly. One side effect of this patch is that VM-initiated writepage() against a file hole will no longer block on writeout of indirect blocks. This is good. (02/04/04 1.369.97.3) ext3 filesystem sync mount speedup: Again, we don't need to sync indirects as we dirty them because we run a commit if IS_SYNC(inode) prior to returning to the caller of write(2). Writing a 10 meg file in 0.1 meg chunks is sped up by, err, a factor of fifty. That's a best case. (02/04/04 1.369.95.15) e100 net driver update 1/3: The patch separates max busy wait constants making in max of 100 usec for wait scb and max of 50 usec for wait cus idle. These constants found sufficient using heavy traffic tests. (02/04/04 1.369.95.16) e100 net driver update 2/3: Adding missing pci write flush to the procedure e100_exec_cmd (02/04/04 1.369.95.17) e100 net driver update 3/3: Adding proper print level qualifier to the printk calls. (02/04/04 1.369.99.1) Detect bad JFS directory to avoid infinite loop (02/04/04 1.369.99.2) JFS include cleanup Remove redundant include of slab.h Submitted by Christoph Hellwig (02/04/04 1.369.99.3) JFS: remove dead code Submitted by Christoph Hellwig (02/04/04 1.369.99.4) Add support for external JFS journal Submitted by Christoph Hellwig & Dave Kleikamp (02/04/04 1.369.99.5) JFS: simplify sync_metapage Submitted by Christoph Hellwig (02/04/04 1.369.99.6) Remove register keyword from JFS code Submitted by Christoph Hellwig (02/04/04 1.369.99.7) No need to handle regular files in jfs_mknod Submitted by Christoph Hellwig (02/04/04 1.369.99.8) Make JFS licence boilerplate uniform, update copyright dates Submitted by Christoph Hellwig and Dave Kleikamp (02/04/04 1.369.100.1) Don't allow preemption to change task state. (02/04/04 1.369.100.2) [PATCH] kjournald exits with nonzero preempt_count The preempt_count debug check that went into 2.5.8-pre1 already caught a simple case in kjournald. Specifically, kjournald does not drop the BKL when it exits as it knows schedule will do so for it. For the sake of clarity and exiting with a preempt_count of zero, the attached patch explicitly calls unlock_kernel when kjournald is exiting. (02/04/04 1.369.100.4) Fix up bad time compare from the -dj merge (02/04/04 1.369.1.165) Cset exclude: davej@suse.de|ChangeSet|20020403195622 (02/04/04 1.369.76.40) In linux/skbuff.h, always use unsigned long for flags. (02/04/04 1.369.92.4) On sparc64, flush_thread needs to setup the PGD cache for 64-bit apps too. (02/04/04 1.369.101.1) USB visor driver Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI for the information. (02/04/04 1.369.1.166) Update kernel version (02/04/04 1.369.1.167) [PATCH] cleanup list usage in dquot From the kernel janitor folks (02/04/04 1.369.1.168) [PATCH] list_for_each is fs/ From the kernel janitor folks (02/04/04 1.369.1.169) [PATCH] Improved allocator for NTFS Originally by Anton Altaparmakov. I think Anton is going to submit his rewritten NTFS soon making this null and void, but in the interim, it fixes a known problem with NTFS and large allocations. (02/04/04 1.369.1.170) [PATCH] increase number of transaction locks in JFS txnmgr Original fix from Andi Kleen (02/04/04 1.369.1.171) [PATCH] MSDOS fs option parser cleanup Original from Rene Scharfe This fixes a problem where MSDOS fs's ignore their 'check' mount option. (02/04/04 1.369.1.172) [PATCH] bss bits for isofs Originally from the kernel janitor folks (02/04/04 1.369.1.173) [PATCH] QNX4fs sync Brings QNX4FS back in sync with 2.4 (02/04/04 1.369.1.174) [PATCH] better dquot accounting (02/04/04 1.369.1.175) [PATCH] ext3 inode generation improvements. Originally from Andrew Morton (02/04/04 1.369.1.176) [PATCH] named structure initialisers for fs/ Originally by Grant R.Guenther Has had a quick once over by Al, who weeded out one chunk that was unrelated. (02/04/04 1.369.1.177) [PATCH] struct super_block cleanup - reiserfs Original from: Brian Gerst Has had a once over by Chris Mason and Al. Seperates reiserfs_sb_info from struct super_block. Brian Gerst (02/04/04 1.369.1.186) [PATCH] EFI GUID partition support update. More bits from Matt Domsch. Fixes GUID printing, and updates to what's in the IA64 tree. Other cleanups are mentioned in the changelog in the patch. (02/04/04 1.369.101.2) USB moved files to different subdirectories to make try to make sense of the current mess, and to allow usb client drivers to integrate into the tree easier. (02/04/04 1.369.1.187) [PATCH] IS_DEADDIR checks (2.5) 2.4 variant will go to Marcelo in a couple of minutes. Patch moves IS_DEADDIR() checks into may_delete(). (02/04/04 1.369.101.3) usb subsystem now builds as modules. dependancies still seem broken. (02/04/04 1.369.1.188) update x86 defconfig (02/04/04 1.369.1.189) Fix tlbflush header file dependencies (02/04/04 1.369.1.190) uhhuh. Fix duplicate merge from -dj tree (02/04/04 1.369.1.191) [PATCH] preemptive kernel behavior change: don't be rude - do not manually set task->state - instead, in preempt_schedule, set a flag in preempt_count that denotes that this task is entering schedule off a kernel preemption. - use this flag in schedule to jump to pick_next_task - in preempt_schedule, upon return from schedule, unset the flag - have entry.S just call preempt_schedule and not duplicate this work, as Linus suggested. I agree. Note this makes debugging easier as we keep a single point of entry for kernel preemptions. The result: we can safely preempt non-TASK_RUNNING tasks. If one is preempted, we can safely survive schedule because we won't handle the special casing of non-TASK_RUNNING at the top of schedule. Thus other tasks can run as desired and our non-TASK_RUNNING task will eventually be rescheduled, in its original state, and complete happily. This is the behavior we have in the 2.4 patches and 2.5 until ~2.5.6-pre. This works. It requires no other changes elsewhere (it actually removes some special-casing Ingo did in the signal code). (02/04/04 1.369.101.4) USB moved lots of the Config.in info into the subdirectories. fixed up the makefiles to work nicer. (02/04/04 1.369.1.192) Scheduler preempt fixes and cleanups (02/04/04 1.369.1.193) Make the assembly-level code match the preempt_sched changes (02/04/04 1.369.1.194) More fixups for tlbflush.h header split (02/04/04 1.369.1.195) Fix exit_notify() to actually do what the comment says it should do - lock out preemption. (02/04/04 1.369.101.5) USB moved some files from misc to image cleaned up makefile some more. (02/04/04 1.369.101.6) USB fixed lib Makefile problem with usb files moving moved drivers/usb/scanner/ to drivers/usb/image/ (02/04/05 1.369.101.7) USB moved the host drivers help to the host directory (02/04/05 1.369.101.8) USB more file movement cleanups. Now handles misc drivers compiled into the kernel corectly. (02/04/05 1.369.1.197) Add device_shutdown() calls to reboot and power off transitions (and let the user know) (02/04/05 1.369.1.198) compile fix for drivers/base/sys.c (02/04/05 1.369.1.199) Add platform driver object (02/04/05 1.369.101.9) USB moved class/storage/ back to storage/ created input/ orderd the makefiles and config.in menus better. (02/04/05 1.369.1.201) Duh. Use "device_lock", not "device_root" for locking. (02/04/05 1.369.101.10) USB added a README file to explain what the different subdirectories are for. (02/04/05 1.369.101.11) USB moved the USB_STORAGE Config.help items into the drivers/usb/storage directory. (02/04/05 1.369.1.203) [PATCH] elevator 'buglet' Lets just kill this check -- it usually only catches drivers queueing something in front of a started request on their own (such as shoving a request sense in front of a failed packet command, for instance). So it's either working around this detection in some drivers, or killing it. I vote for the latter, patch attached against 2.5.8-pre1 :-) (02/04/05 1.369.1.204) [PATCH] PATCH 1 of 4 : knfsd : Use symbols for size calculation for response sizes. Use symbolic names for some common size components in the response size calculation for the NFSD. This makes it easier to get the numbers right and to review them. This patch also fixes a few number for nfsv3 that were wrong. (02/04/05 1.369.1.205) [PATCH] PATCH 2 of 4 : knfsd : Allow exporting of deviceless filesystems if fsid= given Previously we could only export FS_REQUIRES_DEV filesystems as we need a devno to put in the filehandle. Now that we have fsid= (NFSEXP_FSID) we don't need a devno to put in the filehandle so we can relax this requirement. (02/04/05 1.369.1.206) [PATCH] PATCH 3 of 4 : knfsd : Store the fsid in the returned attributes instead of the device number When a filesystem is exported with fsid= we should use that fsid instead of the i_dev number when returning NFS attributes, so that there is no chance of clients that depend on the filesys id in the attributes getting confused by device numbers changing. We only do this if the reference filehandle uses fsid to identify the filesystem, so that a server can be converted from non-fsid= to using fsid= without confusing active clients. (02/04/05 1.369.1.207) [PATCH] PATCH 4 of 4 : knfsd : Increase the max block size for NFS replies. This increases the max read/write size for nfsd from 8K to 32K. This requires making NFSv2 return the right number in statfs requests. NFSv3 already does that. (02/04/05 1.369.1.208) [PATCH] PATCH 4a or 4 : knfs : typo... typo in that last patch, sorry. (02/04/05 1.369.1.209) [PATCH] shift BKL out of notify_change Moved i_sem down into notify_change() and out of the UMSDOS function. Moved BKL down from notify_change into filesystems. (02/04/05 1.369.1.210) Make legacy drivers who use "virt_to_bus()" and friends work on x86. It's up to other architectures to worry about portability for now. (02/04/05 1.369.1.212) Oops, remove remnants of old attribute lock (02/04/05 1.369.1.213) Force some semblance of workingness onto qla1280 driver (02/04/05 1.369.1.214) Clean up do_truncate due notify_change() locking change Summary of changes from v2.5.7 to v2.5.8-pre1 ============================================ (02/03/15 1.369.64.15) acenic net driver update: * clean up vlan defines to dramatically reduce number of ifdefs * re-optimize private structure across cache line boundaries * fix typo(s) in printk/comments (02/03/18 1.369.70.14) USB printer driver added HP DeskJet 959C to the quirks list (02/03/18 1.369.70.15) USB printer driver added more printer quirks to the list (02/03/18 1.369.70.16) USB hcd.c, non-HS periodic transfers This patch adds a missing "break", which prevented low and full speed periodic transfers from getting through the "hcd" framework to the driver (OHCI, for now). Sigh... :) (02/03/18 1.369.70.17) USB mem flags nonpoisonous This patch completely punts on passing SLAB_POISON, I've gotten burnt by it once too many. Seems like the slab code changed somewhere. I've got a separate patch to make the pci_pool code use CONFIG_DEBUG_SLAB, which I'll send around. Meanwhile, I needed this to get at least EHCI to intialize on a 2.5.7-pre1 system. Please merge. (02/03/18 1.369.70.18) USB Comment and documentation cleanups (02/03/18 1.369.70.19) USB inline cleanup to save a chunk of memory in usb-ohci (02/03/18 1.369.70.20) USB echi and Intel ICH This updates the Philips tweak so that it also applies to late-model ICH chips from Intel. (Or so I'm told ... :) That's at least three EHCI implementations known to behave on Linux. (And one hopes VIA soon too...) It also cleans up a few comments relating to 64bit DMA; recent API spec updates make it look like no games are needed with the PCI DMA mask -- it doesn't change the segment used by pci_pool allocations, so it just needs to get turned on if the overall system does 64bit DMA. I've a query in to see if those Philips/Intel tweaks are chip quirks, or just something the EHCI 1.0 spec isn't at all clear about. (02/03/18 1.369.75.1) On sparc{,64}, use ptrace_check_attach instead of verifying things by hand. (02/03/18 1.369.75.2) In Sparc{,64} signal handling, tsk->p_pptr --> tsk->parent (02/03/18 1.369.76.1) Fix build error on non-x86. (02/03/18 1.369.70.21) This updates linux/Documentation/usb/proc_usb_info.txt to: - refer to "usbfs" - describe the /proc/bus/usb/BBB/DDD files - more info about the .../drivers and .../devices - ... generally, gives more information. This is ever so slightly forward looking in how it describes bandwidth requirements for high speed periodic transfers, it's expecting a bugfix patch that's in my queue. (That info is currently broken/meaningless.) (02/03/18 1.369.70.22) [PATCH] uhci.c 2.4.19-pre3 kmem_cache_alloc flags My previous patch which cleaned up some of the spinlocks, moved one of the spinlocks around a call to kmem_cache_alloc. It would sometimes erroneously call it with GFP_KERNEL. This patch fixes the problem by always calling it with GFP_ATOMIC. Thanks to Greg for pointing this out to me. JE (02/03/18 1.369.70.23) [PATCH] uhci.c 2.4.19-pre3 erroneous completion callback uhci.c would call the completion callback when the call to submit_urb failed. This is a rare situation. This patch only calls the completion handler if the URB successfully completed immediately (as in the case of talking to the virtual root hub). JE (02/03/18 1.369.70.24) [PATCH] uhci.c 2.4.19-pre3 interrupt deadlock Unfortunately, I left out one line from my spinlock cleanup patch recently. As a result, using interrupt URB's could cause a deadlock on SMP kernels. This should fix the deadlock Greg reported. JE (02/03/19 1.369.70.25) USB ipaq driver Don't submit urbs while holding spinlocks. Not strictly required in 2.5.x, but it's always better to do less while holding a spinlock. Also a good idea to keep 2.{4,5}.x drivers in sync. (02/03/19 1.369.70.26) USB usbfs periodic endpoint/bandwidth reporting This is an updated version of a patch I sent around a while back. It's against 2.5.7-pre1 (so presumably is fine on 2.5.7), and addresses feedback against that earlier patch. It's bugfixes, mostly for highspeed support, to what /proc/bus/usb/devices shows: - Shows isochronous periods correctly (logarithmic encoding, possibly 1/2/4 microframes if highspeed) - Likewise for high-speed interrupt periods (similar) - Makes high bandwidth endpoints look like they just do bigger packets (up to 3 KBytes/uframe) - Shows highspeed bandwidth correctlly (80% reserved, vs 90% reserved for full/low speed). (02/03/19 1.369.70.27) USB proc_usb_info.txt documented the fact that the interval is not always reported in ms. (02/03/19 1.369.75.3) Update sparc64 defconfig. (02/03/19 1.369.76.2) Netfilter enhancement from Harald Welte and Netfilter team. Add destroy callback to ip_conntrack_helper, to be used by L4 protocol trackers. (02/03/19 1.369.70.28) USB hpusbscsi driver Port changes from 2.4: We do request_sense ourselves to comply with the scanner command set (02/03/19 1.369.76.3) Remove obsolete confusing instructions on tcp_max_syn_backlog from IPv4 sysctl documentation. (02/03/19 1.369.76.4) Make pkt_sched.h:PSCHED_TDIFF_SAFE behave sane when measuring large time intervals. (02/03/19 1.369.76.5) Remove unused field from TCP struct open_request. (02/03/19 1.369.76.6) Do not fail creating _new_ NOARP entry with EPERM. (02/03/19 1.369.76.7) Old bug in skbuff.c, found by someone, but was lost. In __pskb_pull_tail, pskb_expand_head return value test was inverted. (02/03/19 1.369.76.8) IPv4 FIB routing fixes: - fix device leakage in multipath - fix oops due to race by adding spinlock (02/03/19 1.369.76.9) In IPv4 ICMP: pskb_pull really may reallocate packet after the check for 8 bytes was removed from ip_input, so set icmp header pointer after pskb_pull call not before. (02/03/19 1.369.76.10) Fix for ipv4 tunnel devices: - do not make path mtu discovery, when it is disabled :-) (02/03/19 1.369.76.11) IP input fixes: - no need to check for pskb_may_pull() in ip_local_deliver_finish, header is guaranteed to be at right place here. - remove cleaing ip_summed with IP options, it was required due to broken eth_copy_and_csum, but we do not use it any more and it happens to break loopback (02/03/19 1.369.76.12) Terrible bug in ipv4/route.c, mis-sized ip_rt_acct leads to complete memory corruption. (02/03/19 1.369.76.13) TCP Input fixes: 1) Two bugs noticed by Pasi: - Wrong rtt update interval - Forgot to clear retrans_stamp when entering established state 2) Missing LAST_ACK case of processing segment text (step 7) in tcp_rcv_state_process. 3) Remove "final cut" code, purism is good not all the times. :-) (02/03/19 1.369.76.14) UDP fixes: - respect multicast interface when connecting (02/03/19 1.369.76.15) IPV6 addrconf exploit fix: - stop external DoS attack feeding lots of IPv6 prefixes (02/03/19 1.369.76.16) IPv6 neighbour discovery fixes: - Answer to neighbour solicitations on SIT, otherwise freebsd does not want to talk to us. - Fix wrong structure nd_msg and... use it :-) (02/03/19 1.369.76.17) TCP ipv6 fixes: - Fix open_request lookup bug that was already fixed in ipv4 (02/03/19 1.369.76.18) Port of 2.2.x AF_PACKET bug fix. (02/03/19 1.369.76.19) Fix bug in sch_prio.c where wrong handle was being dumped. (02/03/19 1.369.76.20) In sch_sfq.c, allow to descrease length of queue (02/03/19 1.369.76.21) Add new sysctl, medium_id, to devinet. It is used to differentiate the devices by the medium they are attached to. It is used to change proxy_arp behavior: the proxy arp feature is enabled for packets forwarded between two devices attached to different media. (02/03/19 1.369.76.22) Allow to bind to an already in use local port during connect when the connection will still have a unique identity. Fixes port space exhaustion, especially in web caches. Initial work done by Andi Kleen. (02/03/19 1.369.76.23) Fix mis-merge of TCP_LAST_ACK fix. (02/03/19 1.369.76.24) Update port-allocation changes to coincide with struct sock splitup. (02/03/19 1.369.76.25) Update port-allocation changes to coincide with struct sock splitup. (02/03/19 1.369.76.26) Kill unused local var in af_inet.c:inet_stream_connect (02/03/19 1.369.75.4) Move VPTE_BASE_foo definitions to common header instead of scattered all over assembly files. (02/03/20 1.369.77.2) e100 net driver update: 1) This patch provides fix for "wake on arp" and "wake on unicast" functionality when card is suspended by power management. When e100_suspend was called for the device that is in netif_running state the load filter command was executed in the asynchronic mode and the order of actions required to put device into wake up enabled mode was broken. The fix enables to execute WOL configure and load filter commands in the synchronic mode despite of fact that device is in netif_running state. The exec_non_cu_command uses the driver_isolated flag to identify this situation. 2) add EXPORT_NO_SYMBOLS (yay Intel, you have come so far... :)) 3) bump version to 2.0.25-pre1 (02/03/20 1.369.77.3) Merge ethtool initiate-nic-self-test ioctl, and support for it in e100 net drvr. Contributed by Eli Kupermann @ Intel, modified by me. (02/03/20 1.369.78.1) Add three scripts for BK users, to Documentation/BK-usage: bzsend: good for users who want to send reviewable BK patches bz64wrap, unbz64wrap: bzip2 uuencoding wrappers for encapulating BK patches (02/03/20 1.369.78.2) Remove silly overdependency on Perl 5.6.1 in BK helper scripts. (02/03/20 1.369.77.4) Add support file e100_test to e100 net driver. Missed in earlier merge. (02/03/20 1.369.77.5) Merge dl2k gigabit ethernet driver update vendor: * add rio_timer to watch rx condition * move poll initiation to rx refill loop * use del_timer_sync to avoid race (me) * CodingStyle cleanups (me) (02/03/20 1.369.77.6) Merge orinoco_plx wireless driver pci ids from 2.4.x. (02/03/20 1.369.78.3) Update rocketport serial driver: * remove linux 2.1.x backwards compat code (William Stinson) * remove ENABLE_PCI define, use CONFIG_PCI instead * no need to enclose MODULE_xxx in ifdef MODULE (02/03/20 1.369.78.4) Add two AC97 codec ids to old OSS ac97_codec driver. Contributed by Peter Christy. (02/03/20 1.369.77.7) de620 net driver janitor fixes: * free_irq on error * check request_region error value (02/03/20 1.369.78.5) Update munish WAN driver to not kfree memory multiple times. (02/03/20 1.369.78.6) Fix DocBook documentation for ALSA merge, basically s#drivers/sound#sound/oss# (02/03/20 1.369.77.8) Revert epic100 net driver power sequence "fix", it broke some boards. (02/03/20 1.369.76.27) Fix reverse logic in checking sock_writeable return in UDP case. I note in passing that the TCP case is wrong because TCP does not use sock_writeable()s (02/03/20 1.369.75.5) In sparc64/ebus, handle machines with both RIO and non-RIO EBUSes correctly. (02/03/20 1.369.79.1) USB hub changed the interval for checking if the device is connected yet or not. Thanks to Itai Nahshon for the information. (02/03/20 1.369.75.6) On sparc64 Schizo PCI controllers, there is no inofixup to apply during IRQ building. (02/03/20 1.369.75.7) On sparc64, handle assigning ROM and non-standard resources properly. (02/03/20 1.369.75.8) In Sun GEM/HME drivers, if OpenBoot firmware is not available (e.g. i386) fetch the ethernet MAC address from the vital-product data contained in the PCI ROM of the card. (02/03/20 1.369.75.9) Model Sparc64 pci_assign_resource more closely to the implementation in drivers/pci/setup-res.c to make it easier to track bugs. Fix calculation of mem_space end on Sparc64 Schizo PCI controllers. The decode register is set up for the whole 4GB even though the top 2GB is reserved for DMA to/from main memory (ie. IOMMU translated) (02/03/21 1.369.75.10) Merge 2.4.x Sun GEM/HME net driver fixes. (02/03/21 1.369.75.11) Remove debugging printk while probing MAC address. Unregister netdev on shutdown before iounmapping registers. (02/03/21 1.369.75.12) Sun HME/GEM driver probing cleanups. (02/03/21 1.369.70.30) USB visor driver Added support for the Palm m130 device, thanks to Udo Eisenbarth for the information. (02/03/21 1.369.70.31) USB serial driver core - Moved all manipulation of port->open_count into the core. Now the individual driver's open and close functions are called only when the first open() and last close() is called. Making the drivers a bit smaller and simpler. - Fixed a bug if a driver didn't have the owner field set. (02/03/21 1.369.70.32) USB serial drivers changes due to open_count being handled by the usb-serial core code. (02/03/21 1.369.70.33) USB kaweth driver added optus@home uep1045a driver to the list of supported devices. (02/03/21 1.369.76.28) Add missing KERN_foo printk specifiers to networking. Based upon a patch from Denis Vlasenko. (02/03/21 1.369.75.13) Merge 2.4.x VGER sparc32 changes into 2.5.x (02/03/21 1.369.76.29) Add configure Configure.help message and respective config option for CONFIG_IP_NF_NAT_LOCAL (02/03/21 1.369.75.14) Remove explicit initialization of static vars to zero in Sparc ports. (02/03/21 1.369.76.30) Make sure outgoing ICMP and TCP resets use the most uptodate value of ip_default_ttl sysctl. (02/03/21 1.369.75.15) Move bootstr_valid/bootstr_buf back into .data section. Add comment explaining that why these must not be moved into the .bss section. (02/03/22 1.369.76.31) Code (and commentary) in SYN-RECEIVED processing assumes that it cannot be reached in the crossed SYN case. This is wrong if the original SYNs came from a malicious packet generator third party. This can result in a 4 minute ACK fight if the sequence numbers are correct. The fix is the verify the ACK before we do anything else, which should cover all cases. This bug was discovered by Casper Dik. (02/03/22 1.369.70.34) USB pegasus driver fix problem which cause hotplug/unplug crash the kernel (02/03/22 1.369.70.35) USB added rtl8150 usb ethernet driver (02/03/22 1.369.76.32) Bump TcpPassiveOpens when tcp_create_openreq_child succeeds. We have not been bumping this since we create openreqs in TCP, ie. some 6 years ago. :-) (02/03/22 1.369.70.36) [PATCH] Re: [PATCH] hiddev code and docs cleanup I took some time to clean up the code a little, and to add the new calls to the documentation. See patch below. -- Paul (02/03/23 1.369.70.37) USB visor driver added support for the Palm i705 device. thanks to Thomas Riemer for the information. (02/03/25 1.369.70.38) [PATCH] 2.4.19-pre3 uhci.c zero packet Don't know if you saw this on the list or not. Here's a patch which fixes zero packet support for uhci.c - Setup the TD correctly, we weren't shifting the null data size - Only add the zero packet if the transfer was a multiple of the endpoint of the size JE (02/03/25 1.369.75.16) Merge 2.4.x sparc64 PCI IRQ routing fixes into 2.5 (02/03/25 1.369.75.17) Sparc32 cleanups. (02/03/26 1.369.70.39) USB ohci-hcd update It updates the "ohci-hcd" driver to address two issues, one of which could potentially have caused oopses. First, it takes out calls to usb_dec_dev_use() on the submit error path; that's already done elsewhere. (Noted by Georg Acher.) Second, it removes some pointless diagnostics. One is for schedule overrun interrupts, the other is for accessing the frame counter. (02/03/26 1.369.70.40) USB pegasus driver semaphore cleanup and proper link detection (02/03/26 1.369.75.18) Do the slot mapping adjustment to PROM interrupt property in pci_intmap_match even if pbm->num_pbm_intmap is zero. (02/03/26 1.369.76.33) Fix device list locking. Based upon a patch from Maxim Krasnyansky. (02/03/26 1.369.76.34) Big netfilter newnat patch for 2.5.7: - support for multiple expected connections (necessary for protocols like H.323, SIP, PPTP) - helper-definable limit of unconfirmed expectations - timeouts for expectations - full graph of connection relations, even after expectation confirmed - various changes in the API towards conntrack and NAT helper - automatic conntrack helper loading when at helper is loaded - NAT mangling of TCP SACK in case of sequence number alteration (no need to delete SACKPERM anymore, I hope Alexey is happy now) (02/03/26 1.369.75.19) SunHME driver updates: - Fix SMP locking throughout - Deal with hw bug involving lost writes to rxring base address - Disable Never Give Up mode on transmitter, set TX attempts limit to 16 (the default). This deals with a possible hang when the TX deadlocks with the PHY when a jabber occurs. - Delete some dead code. (02/03/27 1.369.70.41) [PATCH] USB uhci bugfix The issue was that the poisoning would posing the data *before* it gave it to us as well, but I didn't clear out a pointer (qh->urbp) and later dereferenced it. Thanks for the report again and for the pci_pool patch so I could troubleshoot it. JE (02/03/27 1.369.70.42) USB ohci-hcd driver update - bugfix: control endpoints can't stall - bugfix: remove bogus intr unlink optimization, by sharing intr/iso code - bugfix: iso submit uses urb->interval - removed iso urb->next ring logic (belongs in hcd layer if anywhere) - simplify/shorten/correct completion handling - in debug, labels setup packets as such - bring CVS ids back up to date (02/03/27 1.369.70.43) USB core sanity check Periodically folk have run into problems where usb-ohci oopses due to device refcount bugs ... This is a minor patch to move the sanity check out of usb-ohci into the generic bits of usbcore. There are comments that suggest a path for a more comprehensive approach too. Applies cleanly against 2.5.7 and I've been testing with it for a while. I can't think of any reason it shouldn't also go into 2.4, beyond the patch not applying cleanly there ... :) (02/03/27 1.369.76.35) Tigon3 net driver fixes: - Make use of pci_unmap_xxx storage optimization. - In tg3_get_invariants, fix cacheline_sz_reg shifts. On 5703 chips, if latency timer is less than 64, set it to 64. - In tg3_test_dma, only run the actual test on 5700/5701 chips. Aparently 5702/5703 revs have some problems. (02/03/27 1.369.75.20) In SBUS probing, handle empty SBUS correctly. (02/03/27 1.369.70.44) USB serial console support added (02/03/27 1.369.76.36) Tigon3 net driver bug fix: - ETHTOOL_GLINK handling forgets to return on success (02/03/28 1.369.70.45) USB serial config.in changes - make serial console only selectable if the code is not a module. - removed lots of CONFIG_EXPERMENTAL dependancies as the drivers have been stable for some time now. (02/03/28 1.369.70.46) USB uhci bug fix. use proper GFP flag setting for submitting a urb. (02/03/28 1.369.70.47) USB io_edgeport driver update fixes to let io_edgeport work properly as a usb serial console (02/03/28 1.369.70.48) USB serial core Module count of a serial converter driver is currently not decremented if a disconnect happens while the tty is held open. The fix is to close the device in usb_serial_disconnect() so that module refcounts are properly updated. (02/03/28 1.369.70.49) USB audio driver - Makes "audio" set the urb->interval in its periodic URBs, so it can submit through the hcd framework. (02/03/28 1.369.70.50) USB hcd driver updates - Nitpickey bugfix to root hub config descriptors ... can't use the same one for high and full speed, since the encoding is different (255 ms FS == 0xff, 256 ms HS == 0x12). - Related, force period to 1/4 second rather than doing any sanity checking for the roothub timer (from Georg) - Don't "giveback" urbs on submit path errors (from Georg) ... means they don't get completion callbacks - Additional error checks on URB data (from Georg) - Uses for unlink synchronization - The "already unlinking" error case is reported like other unlinking errors (not as success) - Ripped out urb->next handling ... it wasn't compatible with the ISO loop model, and at this point I believe it should be completely replaced with queuing urbs inside of the HCDs. (Every HCD handles it for ISO, UHCI needs a magic flag to enable it for bulk ...) (02/03/28 1.369.70.51) USB hiddev interface updated the version number due the previous changes (02/03/28 1.369.75.21) Sparc SBUS fix: Make for_all_sbusdev work with an empty SBUS. (02/03/30 1.369.76.37) net/core/sock.c needs linux/tcp.h to get at TCP state macros. (02/04/01 1.369.70.52) [PATCH] Update to konicawc driver This patch against 2.5.7 fixes an oops and a memleak in the konicawc driver and also adds an option to set the FPS. (02/04/02 1.369.84.1) [PATCH] initrd issue Fix initrd problem that appeared back in 2.5.2-pre6 when kdev_t type changed and comparison function was incorrectly converted.. (02/04/02 1.369.84.2) [PATCH] 2.5.7 IDE 23 - Support for additional Promise controller id's (PDC20276). - Remove code duplication between do_rw_taskfile and do_taskfile. This will evolve into a more reasonable ata_command() function finally. The ata_taskfile function has far too many arguments, but I favour this over having two different code paths for getting actual data to the drive. (02/04/02 1.369.84.3) [PATCH] 2.5.7 IDE 24 - Push BAD_DMA_DRIVE and GOOD_DMA_DRIVE to the ide-pmac.c file, since this is the only place where those get used. - Kill unused fields from the ide_task_s structure. In esp. we pass a task attached to a request and not the other way around! - Rename hwif field to channel in struct ide_drive_s. - Move the request queue to the level where proper serialization has to happen anyway - the channel structure. (02/04/02 1.369.84.4) [PATCH] 2.5.7 IDE 25 - Replace the task_io_reg_t with the simple u8. There is no need to obfuscate the code more then necessary. - kill some unnecessary type definitions out from hdreg.h. - Add proper attributes to register files in hdreg.h. - Don't use raw arrays for tfRegister and hobRegister in ide_task_s. Use out nice global structures describing the fields in them. This allows to kill the following defines: IDE_DATA_OFFSET IDE_FEATURE_OFFSET IDE_NSECTOR_OFFSET IDE_SECTOR_OFFSET IDE_LCYL_OFFSET IDE_HCYL_OFFSET IDE_SELECT_OFFSET IDE_COMMAND_OFFSET and many many others. - Please have a look at the following in pdc4030.c. It couldn't have worked! This has been fixed in one go with the above change: memcpy(args.hobRegister, NULL, sizeof(struct hd_drive_hob_hdr)); - Kill the redundant *_REG_HOB definitions. They don't help readability in any way. (02/04/02 1.369.84.5) [PATCH] 2.5.7 IDE 26 - Mark all members of structures, which get jiffies assigned or involved in ugly timeout calculations with the prefix PADAM_ for easy spotting. This is Polish for "I'm falling down" or "This brings me to the knees" or slag comment for "What a sh..". Please be assured that it doesn't sound vulgar. Please grep for it to see immediately why this nomenclature is justified. - Rename hwifs_s to ata_channel and eliminate ide_hwifs_t as well as the HWIF macro. OK this step makes this patch rather big. (02/04/02 1.369.84.6) [PATCH] 2.5.7 IDE 27 - Make for less terse error messages in ide-tape.c. - Replaced all timecomparisions done by hand with all the proper timer_after() commands. - Remove the drive niec1 mechanisms alltogether. There are several reasons for this: 1. The code implementing it is nonintelliglible and therefore propably broken. 2. If we have to invent somethig about sceduling drive IO, it should be done on the BIO level. 3. We may in fact interleave with the IO sceduling on the upper layers and the results of two overlapping signal filters overlapped with each other can be disasterous to the overall throughput. (In fact they *are* most of the time.) 4. It was not working if you had intermixed modes on different drives DMA versus PIO. 5. Our goal is to have a driver which is able to share the badwidth properly and shouldn't needing this kind of "tuning". - Remove unused nice2 from disk struct. - Rename channel member of ata_channel to unit and device to dev to just prevent wrong interpretations. This prevents constructs like channel->channel... (02/04/02 1.369.84.7) [PATCH] 2.5.7 IDE 28a - Apply Pavel Macheks suspend resume double resume fix. - Finally remove the busy field for ata_operations and replace it with MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT. - Fix ali15xx chipset support by removing initialization differences, apparently caused by mislead interpretation of the specs or a mismatch between the specification and reality. - Guard calls to ide_set_handler with checks to see whatever the previously installed IRQ handler already served it's purpose. - Convert timeout checks on poll_timeout to the time_before() interface. - Consolidate the two different IRQ handlers for multi mode PIO writes into one. The problems remain the same but at least now we will only have to tangle one single problem. (02/04/02 1.369.84.8) [PATCH] ext2_fill_super breakage In 2.5.7 there is a thinko in the allocation and initialisation of the fs-private superblock for ext2. It's passing the wrong type to the sizeof operator (which of course gives the wrong size) when allocating and clearing the memory. Lesson for the day: this is one of the reasons why this idiom: some_type *p; p = malloc(sizeof(*p)); ... memset(p, 0, sizeof(*p)); is preferable to some_type *p; p = malloc(sizeof(some_type)); ... memset(p, 0, sizeof(some_type)); I checked the other filesystems. They're OK (but idiomatically impure). I've added a couple of defensive memsets where they were missing. (02/04/02 1.369.75.24) [PATCH] romfs inode allocation Obvious romfs fix. (02/04/02 1.369.75.25) [PATCH] conditional system call cleanup This version of sys_nfsservctl() fix hadn't made DaveM complain. (02/04/02 1.369.75.26) [PATCH] minixfs cleanups (1/4) Move minix-private stuff to fs/minix/minix.h. (02/04/02 1.369.75.27) [PATCH] minixfs cleanups (2/4) Clean up the write_super-related code in minixfs (02/04/02 1.369.75.28) [PATCH] minixfs cleanups (3/4) Kill BKL in minix/itree* (similar to ext2 patches) (02/04/02 1.369.75.29) [PATCH] minixfs cleanups (4/4) Clean up minix/bitmap.c (02/04/02 1.369.75.30) [PATCH] set_blocksize() in JFS Use sb_set_blocksize() in JFS instead of trying to do it by hand. (02/04/02 1.369.75.31) [PATCH] hfs compile fix Fix typo (02/04/02 1.369.75.32) [PATCH] restoring block size upon umount get_sb_bdev() stores original block size in ->s_old_blocksize and kill_block_super() restores it. This kills 99% of crap with "oh, I've mounted/umounted that device and its behaviour had changed" (remaining 1% can be dealt in pretty similar ways; ideally I'd like to see ioctls that get/set block size dead and gone). (02/04/02 1.369.75.33) [PATCH] fsync_bdev() conversion Bunch of places converted from fsync_dev/invalidate_buffers to fsync_bdev/invalidate_bdev. (02/04/02 1.369.75.34) [PATCH] brw_kiovec() converted to struct block_device * brw_kiovec() and ll_rw_kiovec() switched to struct block_device *. (02/04/02 1.369.75.35) update version and defconfig (02/04/02 1.369.76.38) In tcp_v4_send_reset, use inet_sk to get at ttl of tcp_socket. (02/04/03 1.369.86.1) [PATCH] BKL reduction in do_exit Push BKL down to the (few) routines that actually need it, remove it from the do_exit() path. (02/04/03 1.369.86.2) [PATCH] Hyperthreading binfmt. Another from 2.4, see comments for details (02/04/03 1.369.86.3) [PATCH] fix broken asm constraint Simple compile fix. (02/04/03 1.369.86.4) [PATCH] small fix for mpparse.c Here's a very tiny bugfix for arch/i386/kernel/mpparse.c in the 2.4.19-pre2 kernel. It fixes the problem if there is an error in the MP_processor_info() function where the mpc_apicid value is greater than MAX_APICS, then we need to decrement the number of valid processors before we return (the number was just incremented before the check.) The patch was written by James Cleverdon. (02/04/03 1.369.86.5) [PATCH] AGPGART capability handling cleanup Clean up capability handling in AGPGart. This came forward from 2.4 (02/04/03 1.369.86.6) [PATCH] EFI GUID partition table support. EFI GUID partition table support from Matt Domsch (02/04/03 1.369.86.7) [PATCH] about locations of various sound files. introduction of ALSA moved some files around. This updates various references. (02/04/03 1.369.86.8) [PATCH] Support for ITE interrupt router Support for an extra interrupt router. (02/04/03 1.369.86.9) [PATCH] 3ware driver update for 2.5.8-pre1 Self explanatory driver update from vendor. (02/04/03 1.369.86.10) [PATCH] watchdog API documentation. (02/04/03 1.369.86.11) [PATCH] eicon driver was sleeping with lock held. (02/04/03 1.369.86.12) [PATCH] extra codepage support. Another forward port from 2.4 (02/04/03 1.369.86.13) [PATCH] AMD ELAN support. Add support for AMD Elan. (More ELAN patches to follow which rely on CONFIG_MELAN) (02/04/03 1.369.86.14) [PATCH] Cyrix irq router tweak Another small change from 2.4 (02/04/03 1.369.86.15) [PATCH] Cyclades driver region cleanup (02/04/03 1.369.86.16) [PATCH] Various completion users. These files use completion, but don't include header. (02/04/03 1.369.86.17) [PATCH] Document an errata workaround in apic code. (02/04/03 1.369.86.18) [PATCH] faster update_atime. Another 2.4 forward port, original from Andrew Morton. (02/04/03 1.369.86.19) [PATCH] DMI scanner update. Various quirks from 2.4 and other sources. (02/04/03 1.369.86.20) [PATCH] AMD Elan uses slightly different clock freq (02/04/03 1.369.86.21) [PATCH] export rbtree routines for modules. (02/04/03 1.369.86.22) [PATCH] Detect get_block() errors in block_read_full_page() Originally from Anton Altaparmakov.. This causes errors from get_block() in block_read_full_page() to be detected and handled properly (by setting page error flag). Without the patch the page (or parts of the page) will contain random data on get_block() failing without any form of error being signalled which can be catastrophic for filesystems using block_read_full_page() for accessing their metadata. And for normal data it would mean the user would see random data instead of what they expected. (02/04/03 1.369.86.23) [PATCH] add AMD Elan resources. (02/04/03 1.369.86.24) [PATCH] Extra cards support for MOXA driver (02/04/03 1.369.86.25) [PATCH] faster kiobuf init. Originally from Intel, has been around various vendor trees for a while. Aparently worth a noticable speed up in some applications. (02/04/03 1.369.86.26) [PATCH] Fix up broken do while macros. (02/04/03 1.369.86.27) [PATCH] document new address space operations. (02/04/03 1.369.86.28) [PATCH] fix up broken comment delimiters. (02/04/03 1.369.86.29) [PATCH] proc race on task_struct->sig Originally from Chris Mason .. collect_sigign_sigcatch can race against exit_sighand. I haven't been able to reproduce it, but I think it causes the oops reported in the 'Kernel Hangs 2.4.16 on heavy io Oracle Tivolie TSM' thread. (02/04/03 1.369.86.30) [PATCH] silence DVD_INVALIDATE_AGID output. Ancient patch from Jens to hush certain drives which generate a lot of printk noise when playing DVDs. (02/04/03 1.369.86.31) [PATCH] Simple boot flag specification support. Originally by Alan. It was in the 2.4-ac tree for ages, much tweaked by myself and Thomas Hood. Its main purpose is for skipping the full memory test and other time-wasting diagnostics on reboot. (02/04/03 1.369.86.32) [PATCH] sonypi driver update from 2.4 (02/04/03 1.369.86.33) [PATCH] group #include's together in x86 ioremap.c (02/04/03 1.369.86.34) [PATCH] Gameport patch for drivers/sound/mad16.c From: Michael Haardt for 2.4, munged by me. the MAD16 driver is able to enable/disable its gameport, but it does not register it in the input subsystem. The appended patch against 2.4.19-pre4 fixes that and also allows to enable to gameport via kernel command line, not only when loaded as module. (02/04/03 1.369.86.35) [PATCH] CREDITS updates (02/04/03 1.369.86.36) [PATCH] Various typo fixes. Mostly harmless but 1-2 break compilation. (02/04/03 1.369.86.37) [PATCH] region handling cleanups for tpqic02 (02/04/03 1.369.86.38) [PATCH] UDF write support problem in 2.5.7 From Peter Osterlund I can't get UDF write support to work in kernel 2.5.7 or 2.5.7-pre2. The problem is that linux/config.h is not included, so CONFIG_UDF_RW is undefined and the driver is compiled without write support. This patch fixes my problem: (02/04/03 1.369.86.39) [PATCH] unnecessary includes. A few follow ups to the cleanup done circa 2.5.4 (02/04/03 1.369.86.40) [PATCH] Update file list in INDEX (02/04/03 1.369.86.41) [PATCH] PCI IDS update. Mostly from 2.4. Adds some new ones, and removes some dupes. (02/04/03 1.369.86.42) [PATCH] Update bigphysarea URL (02/04/03 1.369.86.43) [PATCH] watchdog nowayout for i810-tco Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.44) [PATCH] videodev fixups / generic usercopy helper Originally from Gerd... I've just noticed that a hole left in the recent changes which should allow the usb v4l drivers to unregister with open file handles. The drivers itself handle it just fine, but video_generic_ioctl() will barf when called on unregistered devices. Oops. One way to fix this is to expect drivers call the helper function and pass a pointer for the function doing the actual work, i.e. handle it this way: driver_ioctl(inode,file,cmd,userptr) -> video_usercopy(inode,file,cmd,userptr,func) copy_from_user(...) -> func(inode,file,cmd,kernelptr); copy_to_user(...) Patch against 2.5.7-pre2 below. It updates videodev.[ch] and adapts usbvideo.c to show how the driver changes will look like. Note that this change makes the usercopy helper function a very generic one, it probably could be used for other drivers to (as long as the API has sane magic numbers based on _IO*(...) defines) as there is no video4linux-related stuff in there any more. So we might think of renaming it an moving it to some more central place (fs/ioctl.c maybe). (02/04/03 1.369.86.45) [PATCH] watchdog nowayout for acquirewdt Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.46) [PATCH] printk levels for vme_scc driver (02/04/03 1.369.86.47) [PATCH] watchdog nowayout for eurotechwdt Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.48) [PATCH] watchdog nowayout for ib700wdt Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.49) [PATCH] more then enough typos. s/more then/more than/ (02/04/03 1.369.86.50) [PATCH] remove dead comment Original from William Lee Irwin III (02/04/03 1.369.86.51) [PATCH] __init/__exit does nothing in prototypes (02/04/03 1.369.86.52) [PATCH] reiserfs tools update. Recommended version bump. (02/04/03 1.369.86.53) [PATCH] Remove guess from bttv docs. (02/04/03 1.369.86.54) [PATCH] More verbosity in VIA tweak From 2.4 (02/04/03 1.369.86.55) [PATCH] watchdog nowayout for advantechwdt Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.56) [PATCH] updated documentation for w9966 driver. From 2.4 (02/04/03 1.369.86.57) [PATCH] extra sanity checks for mempool (02/04/03 1.369.86.58) [PATCH] khttpd logs wrong debug message on leaving function. (02/04/03 1.369.86.59) [PATCH] nbd compile fix. (02/04/03 1.369.86.60) [PATCH] strtok -> strsep in adfs (02/04/03 1.369.86.61) [PATCH] remove workaround for old binutils. Modern binutils spits out a warning, fixing this broke older binutils. I guess we can do this in 2.5 ? (02/04/03 1.369.86.62) [PATCH] remove bogus return from mtrr driver. It's amazing what you spot when you Lindent things. (02/04/03 1.369.86.63) [PATCH] strtok->strsep in hpfs (02/04/03 1.369.86.64) [PATCH] strtok->strsep in hfs (02/04/03 1.369.86.65) [PATCH] typo in pci_set_mwi header (02/04/03 1.369.86.66) [PATCH] strtok->strsep in autofs (02/04/03 1.369.86.67) [PATCH] strtok->strsep in shmem (02/04/03 1.369.86.68) [PATCH] i2c-proc wasn't checking kmalloc result (02/04/03 1.369.86.69) [PATCH] compile fix for gemtek-pci radio card (02/04/03 1.369.86.70) [PATCH] strtok->strsep for autofs4 (02/04/03 1.369.86.71) [PATCH] strtok->strsep isofs (02/04/03 1.369.86.72) [PATCH] strtok->strsep in usb (02/04/03 1.369.86.73) [PATCH] strtok->strsep in jfs (02/04/03 1.369.86.74) [PATCH] Only offer ARM PCMCIA on ARM machines. (02/04/03 1.369.86.75) [PATCH] strtok->strsep in ntfs (02/04/03 1.369.86.76) [PATCH] strtok->strsep for reiserfs (02/04/03 1.369.86.77) [PATCH] strtok->strsep in isdn avmb1 capifs (02/04/03 1.369.86.78) [PATCH] apply KERNELRELEASE regexp globally in makefile Handles things like 2.5.7-dj2-extra-foo-voon in Kernelversion. (02/04/03 1.369.86.79) [PATCH] more kbuild cleanup. Define KBUILD_BASENAME for init/do_mounts (02/04/03 1.369.86.80) [PATCH] Define KBUILD_BASENAME for .i * .s originally from John Levon (02/04/03 1.369.86.81) [PATCH] MP1.4 SPEC compliance. (02/04/03 1.369.86.82) [PATCH] strtok->strsep in affs (02/04/03 1.369.86.83) [PATCH] Small fix to pci_alloc_consistent() Original from Badari Pulavarty : pci_alloc_consistent() is returning zone DMA memory to highmem enabled drivers when it really should have been returning zone NORMAL. Found this while testing qlogicfc driver for > 4GB support. (02/04/03 1.369.86.84) [PATCH] strtok->strsep in atari config (02/04/03 1.369.86.85) [PATCH] wrong return codes in ipc shm We always returned success even when we had no ->vm_ops (02/04/03 1.369.86.86) [PATCH] devexit fix for i82092 In light of the 'lets use this for shutdowns' this will eventually be ripped out, but for now it makes sense to include it so that we can build it again on modern binutils (02/04/03 1.369.86.87) [PATCH] Fix race in JFS From Christoph Hellwig http://oss.software.ibm.com/pipermail/jfs-patches/2002-March/000045.html (02/04/03 1.369.86.88) [PATCH] malloc.h -> slab.h malloc.h is no more. (02/04/03 1.369.86.89) [PATCH] add EISA port to /proc/ioports (02/04/03 1.369.86.90) [PATCH] Fix reiserfs oops with seperate journal dev From Oleg@namesys. (02/04/03 1.369.86.91) [PATCH] strtok->strsep in alpha setup (02/04/03 1.369.86.92) [PATCH] watchdog nowayout for sbc60xxwdt Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.93) [PATCH] Remove address member from scatterlist docs. The element is dead, so update the docs to reflect reality. (02/04/03 1.369.86.94) [PATCH] extra PIIX entries for IRQ routers. (02/04/03 1.369.86.95) [PATCH] Allow use of 256 loop devices Because 256 is rounder than 255 I guess 8-) (02/04/03 1.369.86.96) [PATCH] watchdog nowayout for shwdt Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.97) [PATCH] updates for make rpm - install .config in /boot - provide kernel-drm package if drm is compiled - handle extra '-' marks so that linux-2.5.8-dj3-voon works. (02/04/03 1.369.86.98) [PATCH] DMI entries for HP Pavillion laptops. These things have USB IRQ routing problems we can work around.. (02/04/03 1.369.86.99) [PATCH] Clean up CONFIG_HIGHMEM & HIGHPTE options. Makes CONFIG_HIGHPTE an option instead of derived. Original from Steven Cole. (02/04/03 1.369.86.100) [PATCH] watchdog nowayout for machzwd Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.101) [PATCH] watchdog nowayout for softdog Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.102) [PATCH] watchdog nowayout for wdt_pci Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.103) [PATCH] watchdog nowayout for wdt Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.104) [PATCH] missing includes. There still seem to be some casualties since the include file shakeup a few revisions back, this adds quite a few missing ones, more to come. (02/04/03 1.369.86.105) [PATCH] Christoph Hellwig contact update From 2.4 (02/04/03 1.369.86.106) [PATCH] watchdog nowayout for mixcomwd Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.107) [PATCH] seq_file for /proc/partitions (take 2) Original from Randy Dunlap ... (02/04/03 1.369.86.108) [PATCH] document functions. The second hunk also contains a fix from Badari Pulavarty to make page_to_phys() work on pages >4GB. Without this, we truncate the physical address to 32bit (02/04/03 1.369.86.109) [PATCH] kdev_t fixes. The usual search and replace type operations from various people to various drivers.. (02/04/03 1.369.86.110) [PATCH] x86 microcode driver update From Tigran via 2.4 (02/04/03 1.369.86.111) [PATCH] Pentium 4 NMI watchdog support From Mikael via 2.4. (02/04/03 1.369.86.112) [PATCH] jiffies wrap fixes. Some from 2.4, some from the kernel janitor team,.. (02/04/03 1.369.86.113) [PATCH] Add missing MODULE_LICENSE tags Still a few out there.. Most of these from 2.4 (02/04/03 1.369.86.114) [PATCH] Add support for National Semiconductor x86's. These are mostly Cyrix-alike, but for some quirks we work around. (02/04/03 1.369.86.115) [PATCH] watchdog nowayout for wdt977 Originally from Matt Domsch. Adds a nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT From 2.4 (02/04/03 1.369.86.116) [PATCH] PPP documentation. From Paul via 2.4 (02/04/03 1.369.86.117) [PATCH] x86 bluesmoke update. o Make MCE compile time optional (Paul Gortmaker) o P4 thermal trip monitoring. (Zwane Mwaikambo) o Non-fatal MCE logging. (Me) (02/04/03 1.369.86.118) [PATCH] pnpbios driver update. Update from Thomas.. Here are the additional bits from the -ac tree, diffed against 2.5.6 + 2.5.5-dj3 patch. The changes include: - Improve some comments - Postpone starting the kernel thread (Alan Cox) - Call kernel thread 'kpnpbiosd' instead of 'kpnpbios' - Consolidate printing of error messages to save space - Add __init and __exit tags and return appropriate error codes - Print slightly more consistent messages - Get closer to supporting build-as-module (02/04/03 1.369.86.119) [PATCH] Remove last remaining bits of strtok. (02/04/03 1.369.86.120) update for i386 config.in changes (02/04/03 1.369.87.2) e1000 net drvr update 1/13: License update, the "GNU General Public License" was incorrectly referred to as the "GNU Public License". (02/04/03 1.369.87.3) e1000 net drvr update 2/13: Update to low level hardware code. Adds support for the new 82540 device. Replaces e1000_mac.c e1000_mac.h e1000_phy.c and e1000_phy.h with e1000_hw.c and e1000_hw.c. Changes to the makefile, header includes, and some minor function syntax changes to get the driver working with the new code. (02/04/03 1.369.87.4) e1000 net drvr update 3/13: Search and replace of adapter->shared with adapter->hw throughout the driver. This matches the naming used in e1000_hw.c and is more correct. (02/04/03 1.369.87.5) e1000 net drvr update 4/13: Updated transmit path. Breaks the transmit path up to make it more understandable. Aggressively reclaim resources by checking for completed transmits before queuing each new frame to avoid stalling the driver by delaying interrupts to long. (02/04/03 1.369.87.6) e1000 net drvr update 5/13: VLAN hardware offload. (02/04/03 1.369.87.7) e1000 net drvr update 6/13: Replace LIST_LEN macro use with the standard ARRAY_SIZE. (02/04/03 1.369.87.8) e1000 net drvr update 7/13: Adaptive Inter-Frame Spacing to reduce collisions and improve half duplex transmit performance. (02/04/03 1.369.87.9) e1000 net drvr updates 8/13: Minor receive cleanup, queue empty buffers to the hardware in groups of 16 to reduce unneeded fetches and improve PCI efficiency. (02/04/03 1.369.87.10) e1000 net drvr update 9/13: change_mtu cleanup. Allows frame sizes up to 2k on the 82542 instead of limiting the MTU to 1500, so that the 82542 can be used with software 802.1q VLANs. (02/04/03 1.369.87.11) e1000 net drvr updates 10/13: ProcFS code updates, check for page boundaries. (02/04/03 1.369.87.12) e1000 net drvr updates 11/13: Bump version to 4.2.8-k1, use EXPORT_NO_SYMBOLS, minor changes to ensure that reported link information is always correct, remove magic numbers in calls to memset. (02/04/03 1.369.87.13) e1000 net drvr update 12/13: Update a few stale comments (02/04/03 1.369.87.14) e1000 net drvr update 13/13: Whitespace cleanup (02/04/03 1.369.87.15) Small net driver fixes/cleanups related to setting dev->last_rx equal to jiffies. (02/04/03 1.369.87.16) net driver janitor fixes: * region resource handling * do-while macro definitions * error cleanup (02/04/03 1.369.86.121) Fix missing include due to do_exit() BKL movement (02/04/03 1.369.86.122) strtok -> strsep fixes (02/04/03 1.369.86.123) Fix compile without EISA support (02/04/03 1.369.86.124) Header file cleanup fixes (02/04/03 1.369.86.125) vmalloc_to_page() should be usable for everybody (see discussion on kernel mailing list) (02/04/03 1.369.89.2) s/extern inline/static inline/ for net drivers: aironet4500, arlan, e2100, baycom, soundmodem (02/04/03 1.369.89.3) These net drivers init dev->rmem_start/end but do not use these at all (probably as a result of copying skeleton or similar). Removed this as a step in the goal to remove rmem_start/end from netdev struct entirely. (02/04/03 1.369.89.4) drivers/net/sb1000.c does not use any ISA memory for I/O but does (ab)use the rmem_end field to store an I/O port address in. As rmem_end is going away, this does a s/rmem_end/mem_start/g since mem_start is otherwise unused in sb1000. (02/04/03 1.369.89.5) The struct netdev rmem_start and rmem_end entries are specific to 8390 based net cards and hence these should be moved into the dev->priv for these cards. This patch adds rmem_start and rmem_end to dev->priv in 8390.h, and does: s/dev->rmem_/ei_local.rmem_/g on all 8390 shared mem drivers. (02/04/03 1.369.89.6) Enable multiple ISA ethernet probes at boot (old behaviour was to quit once eth0 was found) - it is long since anyone shipped or built kernels with all the ISA drivers compiled in. This change will eliminate the need for adding "ether=...." at the boot prompt for a lot of users who build their own kernels and have multiple ISA ethercards at standard (i.e. probed) I/O addresses. Also got sick of counting zeros, so did a struct init cleanup, i.e. {1,0,0,0,0,0,0,0,9} -> {one:1, nine:9} (02/04/03 1.369.89.7) finally, remove rmem_{start,end} from struct net_device. one more step closer to killing off ether= (02/04/03 1.369.89.8) Remove old 2.2.x wait queue compat code from cosa wan driver. (02/04/03 1.369.89.9) Merge new tc35815 net driver from 2.4.x. (02/04/03 1.369.89.10) jiffies wrap fixes for net drivers atp, yam, and sb1000. (02/04/03 1.369.89.11) Merge new sun3 82586 net driver from 2.4.x. (02/04/03 1.369.89.12) Merge SIByte SB1250 net driver from 2.4.x. (02/04/03 1.369.86.128) Remove unused, and now deprecated, references to dev->rmem_{start,end} in skfp and smctr drivers. (02/04/03 1.369.86.129) Clean up tg3 net drver PCI DMA mapping, and in the process fix the build on ia32. Author: Dave Miller (02/04/03 1.369.70.53) USB HID driver removed CONFIG_USB_HIDDEV #ifdefs in the driver. (02/04/03 1.369.70.54) USB rtl8150 driver fix the "small packet" problem and debug messages cleanup (02/04/03 1.369.70.55) USB UHCI driver The patch ensures that uhci.c doesn't use urb->status after the completion callback if it doesn't need to. (02/04/03 1.369.70.56) USB tiusb added tiusb driver some tweaks to the driver done by greg@kroah.com (02/04/03 1.369.70.57) USB 64bit fixes (02/04/03 1.369.70.58) USB safe_serial added safe_serial driver tweaks to the driver done by greg@kroah.com to get things to work on 2.5 (02/04/03 1.369.70.59) USB ohci driver fixes - An oopsable bug affecting unlink of interrupt transfers. Fix mirrors one done ages ago for ISO. (Original patch by Matt Hughes) - Better cleanup on init failure (Matthew Frederickson) - fixes the problem Stuart reported, where interrupt urbs couldn't be unlinked from their completion handlers, and it also makes OHCI return the correct status code for async unlink requests (-EINPROGRESS not zero). (02/04/03 1.369.70.60) USB Updated the CREDITS, Config.help, Config.in, and Makefile to be up to date with the last round of USB changes. (02/04/03 1.369.86.130) Get rid of duplicated EISA_bus variable (02/04/03 1.369.86.131) oops, lost end parenthesis (02/04/03 1.369.86.132) [PATCH] The last? strtok fixes. Hopefully this is all of them.. (02/04/03 1.369.86.133) [PATCH] simple preemption debug check This simple check was first suggested by Andrew Morton. Pretty basic - whines if a task exits with a nonzero preempt_count value. I put an identical check in the 2.4 preempt-kernel patch and - sure enough - it was found that XFS essentially disables preemption as it destroys data structures containing locks without first unlocking. The SGI folks are working on that. Anyhow, its a quick and clean solution to debugging potential problems. Patch is against 2.5.7, please apply. Robert Love