Internet-Draft XML to JSON for RPP October 2024
Wullink & Kowalik Expires 24 April 2025 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-wullink-rpp-json-00
Published:
Intended Status:
Standards Track
Expires:
Authors:
M. Wullink
SIDN Labs
P. Kowalik
DENIC

EPP XML to RPP JSON conversion rules

Abstract

This document describes the rules for converting The Extensible Provisioning Protocol (EPP) [RFC5730] XML based messages to a JSON [RFC8259] for use with the RESTful Provisioning Protocol (RPP).

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 24 April 2025.

Table of Contents

1. Introduction

EPP [RFC5730] employs XML to define its protocol interactions, with XML Schema Definitions (XSD) serving as the formal schema language to outline the structure and validate the conformance of EPP XML messages. These XSDs, integral to the EPP RFCs, ensure that EPP messages adhere to the expected syntax and semantic rules. This document describes the rules and methodologies for converting these XSDs, to JSON Schema, which serves a similar purpose for JSON formatted data. JSON Schema provides a robust framework for describing and validating the structure of JSON data, offering a parallel method for enforcing syntactical correctness and logical consistency in JSON formatted EPP messages.

As the domain registration industry evolves towards adopting RESTful APIs and other JSON-based interactions, there's a need for analogous schema definitions to ensure consistency, validation, and interoperability of JSON representations of EPP messages. This document aims to bridge this gap by providing a standardized approach to translating the rigorously defined XSDs of EPP into JSON Schema, facilitating the use of JSON in the RESTful Provisioning Protocol and potential future EPP-related protocols and transports.

This approach eventually allows for converting valid EPP XML messages to the JavaScript Object Notation (JSON) Data Interchange Format [RFC8259], for use with EPP.

1.1. Motivation

The RESTful Provisioning Protocol (RPP) introduces a new provisiong mechanism that aligns more closely with modern cloud infrastructure, enhancing the scalability of server deployments. While RESTful protocols do not mandate a specific media type for resource description, the widespread adoption of JSON in web services has established it as the de facto standard for modern APIs. The increasing availability of tools, software libraries, and a skilled workforce, coupled with the declining popularity of XML, has led several registries to adopt JSON for data exchange within their API ecosystems. Registries supporting JSON, can offer a unified API ecosystem that extends beyond domain name and IP address provisioning, maintaining a consistent technology stack, data formats, and developer experience.

JSON's syntax, known for its straightforwardness and minimal verbosity compared to XML, significantly eases the tasks of writing, reading, and maintaining code. This simplicity is especially advantageous for the rapid comprehension and integration of provisioning APIs.

The lightweight nature of JSON can result in faster processing and data transfers, a critical aspect in high-volume transaction environments such as domain registration. Enhanced API response times can lead to more efficient domain lookups, registrations, and updates. Moreover, JSON parsing is typically faster and more straightforward than XML parsing, contributing to improved system performance amid frequent interactions between RPP clients and servers.

However, the absence of a standardized JSON format for domain provisioning has led to the emergence of TLD-specific implementations that lack interoperability, increasing the development effort required for integration. Similarly, at the registrar level, the absence of standards has resulted in numerous incompatible API implementations provided to clients and resellers. Standardizing a JSON format for domain provisioning within the RPP framework could mitigate these challenges, reducing fragmentation and simplifying integration efforts across the domain registration industry.

2. Terminology

In this document the following terminology is used.

EPP RFCs - This is a reference to the EPP version 1.0 specifications [RFC5730], [RFC5731], [RFC5732] and [RFC5733].

RESTful Provisioning Protocol - A RESTful protocol for provisiong heterogeneous database objects.

3. Conventions Used in This Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

JSON is case sensitive. Unless stated otherwise, JSON specifications and examples provided in this document MUST be interpreted in the character case presented. The examples in this document assume that request and response messages are properly formatted JSON documents. Indentation and white space in examples are provided only to illustrate element relationships and for improving readability, and are not REQUIRED features of the protocol.

4. XSD Conversion Rules

This chapter presents rules for converting EPP XSD into JSON Schema.

4.1. Elements and Attributes

Rule 1: Elements in XSD must be converted to properties in the JSON Schema, preserving names.

XSD:

<element name="name" type="eppcom:labelType"/>

JSON Schema:

{
  ...
  "properties": {
    "name": {
      "$ref": "#/definitions/labelType"
    }
    ...
  }
}

Rule 2: Attributes in XSD must be represented as JSON properties, prefixed with "@", retaining original names with the prefix addition.

XSD:

<simpleContent>
    <extension base="normalizedString">
    <attribute name="s" type="domain:statusValueType" use="required"/>
    <attribute name="lang" type="language"/>
    </extension>
</simpleContent>

JSON Schema

{
  ...
  "properties": {
    "@s": {
      "$ref": "#/definitions/statusValueType"
    },
    "@lang": {
      "$ref": "#/definitions/language"
    }
    ...
  },
  "required": ["@s"]
}

4.2. Simple Types and Enumerations

Rule 3: Simple types, including elements with only text content, must be converted to appropriate JSON types, e.g., xs:string to type: string.

XSD:

<simpleType name="labelType">
  <restriction base="xs:string" />
</simpleType>

JSON Schema:

{
  "definitions": {
    "labelType": {
      "type": "string"
    }
  }
}

Rule 4: Enumerations in XSD must be represented using the enum keyword in JSON Schema.

XSD:

<simpleType name="trStatusType">
  <restriction base="token">
    <enumeration value="clientApproved"/>
    <enumeration value="clientCancelled"/>
    ...
  </restriction>
</simpleType>

JSON Schema:

{
  "definitions": {
    "trStatusType": {
      "type": "string",
      "enum": [
        "clientApproved",
        "clientCancelled",
        ...
      ]
    }
  }
}

4.3. Occurrence Constraints

Rule 5: Elements with minOccurs: 0 and maxOccurs: 1 should be represented as optional properties in the JSON Schema.

XSD:

  <complexType name="infoType">
    <sequence>
      <element name="authInfo" type="authInfoType" minOccurs="0"/>
      ...
    </sequence>
  </complexType>

JSON Schema:

{
  "type": "object",
  "properties": {
    "authInfo": {
      "$ref": "#/definitions/authInfoType"
    }
    ...
  },
  "required": []
}

Rule 6: Elements with minOccurs: 1 and maxOccurs: 1 or omitted attributes must be represented as mandatory properties in the JSON Schema.

XSD:

<xs:complexType name="createType">
  <xs:sequence>
    <xs:element name="name" type="xs:string"/>
    ...
  </xs:sequence>
</xs:complexType>

JSON Schema:

{
  "type": "object",
  "properties": {
    "name": {
      "type": "string"
    }
    ...
  },
  "required": ["name"]
}

Rule 7: Elements allowing multiple occurrences must be represented as JSON arrays, using minItems and maxItems to enforce minOccurs and maxOccurs.

XSD:

  <complexType name="mNameType">
    <sequence>
      <element name="name" type="eppcom:labelType" maxOccurs="10"/>
    </sequence>
  </complexType>

JSON Schema:

{
  "type": "object",
  "properties": {
    "name": {
      "type": "array",
      "items": {
        "$ref": "#/definitions/labelType"
      },
      "maxItems" : 10
    }
  }
}

4.4. Complex Types

Rule 8: Complex types in XSD must be converted to JSON objects in the JSON Schema, with properties adhering to subsequent rules for elements and attributes. Properties rendered through choice or sequence elements included in complex types shall be included in the same object definition as opposed to creating a separate object level.

XSD:

  <complexType name="createType">
    <sequence>
      <element name="name" type="eppcom:labelType"/>
      <element name="period" type="domain:periodType" minOccurs="0"/>
      ...
    </sequence>
  </complexType>

JSON Schema:

{
    "title": "createType",
    "type": "object",
    "properties": {
        "name": {
            "$ref": "#/definitions/labelType"
        },
        "period": {
            "$ref": "#/definitions/periodType"
        },
        ...
    },
    "required": ["name", ...]
}

4.5. Sequences

Rule 9: Sequences in XSD must be converted to JSON objects in the JSON Schema, with each sequence element becoming a property of the object. Cardinality dictated by minOccurs and maxOccurs must be applied to determine if an element is represented as optional, mandatory, or an array.

XSD:

  <complexType name="createType">
    <sequence>
      <element name="name" type="eppcom:labelType"/>
      <element name="period" type="domain:periodType" minOccurs="0"/>
      ...
    </sequence>
  </complexType>

JSON Schema:

{
    "title": "createType",
    "type": "object",
    "properties": {
        "name": {
            "$ref": "#/definitions/labelType"
        },
        "period": {
            "$ref": "#/definitions/periodType"
        },
        ...
    },
    "required": ["name", ...]
}

4.6. Choices

Rule 10: The choice construct in XSD must be represented in JSON Schema using the oneOf keyword, allowing for representation of multiple possible structures with only one being valid at a time. Each choice property MUST be marked as required to make a clear and unambigous distinction between the variants.

XSD:

<complexType name="authInfoChgType">
  <choice>
    <element name="pw" type="eppcom:pwAuthInfoType"/>
    <element name="ext" type="eppcom:extAuthInfoType"/>
    ...
  </choice>
</complexType>


JSON Schema:

{
  "type": "object",
  "oneOf": [
    {
      "properties": {
        "pw": {
          "$ref": "#/definitions/pwAuthInfoType"
        }
      },
      "required": ["pw"]
    },
    {
      "properties": {
        "ext": {
          "$ref": "#/definitions/extAuthInfoType"
        }
      },
      "required": ["ext"]
    }
    ...
  ]
}

4.7. Mixed Content and Special Cases

Rule 11: Elements with mixed content must be represented as JSON objects with #text for text content and properties for each child element. If schema allows for multiple instances of text content the #text property should be defined as an array.

XSD:

  <complexType name="errValueType" mixed="true">
    <sequence>
      <any namespace="##any" processContents="skip"/>
    </sequence>
    <anyAttribute namespace="##any" processContents="skip"/>
  </complexType>

JSON Schema:

{
  "type": "object",
  "properties": {
    "#text": {
      "type": "array",
      "items": {
        "type": string
      }
    },
    "additionalProperties": true
  }
}

Rule 12: Empty elements in XSD or EPP normative text must be represented as properties with a null fixed value in the JSON Schema.

XSD:

<complexType name="eppType">
    <choice>
      ...
      <element name="hello"/>
      ...
    </choice>
</complexType>

JSON Schema:

{
  "type": "object",
  "oneOf": [
    ...
    {
        "properties": {
            "hello": {
                "type": "null"
            }
        },
        "required": ["hello"]
    }
    ...
  ]
}

Rule 13: Elements with attributes and text content must be represented as JSON objects with #text for text and properties for each attribute, prefixed with "@".

XSD:

  <complexType name="mixedMsgType" mixed="true">
    <sequence>
      <any processContents="skip" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute name="lang" type="language" default="en"/>
  </complexType>

JSON Schema:

{
  "type": "object",
  "properties": {
    "#text": {
      "type": "array",
      "items": {
        "type": string
      }
    },
    "@lang": {
        "$ref": "#/definitions/language"
    },
    "additionalProperties": true
  }
}

TODO: Rules for different flavours of token type (min/max characters etc.)

TODO: merge the content examples with the rules above?

5. XML Conversion Rules

A XML element may exist in one of 7 distinct forms, the sections below describe how these forms MUST be translated to valid JSON.

  1. Empty
  2. Pure text content
  3. Attributes only
  4. Pure text content and attributes
  5. Child elements with different names
  6. Child elements with identical names
  7. Child element(s) and contiguous text

5.1. Empty

An empty XML element MUST be mapped to to a key matching the name of the element and a null value.

XML:

<hello/>

JSON:

{
    "hello": null
}

5.2. Pure text content

An XML element containing text only MUST be mapped to a key matching the name of the element and the text MUST be used for the value

XML:

<lang>en</lang>

JSON:

{
    "lang": "en"
}

5.3. Attributes only

An XML element containing one or more atributes only, MUST be mapped to a JSON object matching the name of the element. Each XML attribute, prefixed using the @ character, MUST be added as a key-value pair to the object.

XML:

<msgQ count="5" id="12345"/>

JSON:

{
    "msgQ": {
        "@count": "5",
        "@id": "12345"
    }
}

5.4. Pure text content and attributes

An XML element containing one or more atributes and text content only, MUST be mapped to a JSON object matching the name of the element. The text content MUST, prefixed using the string #text, MUST be added as a key-value pair to the object.

XML:

<msg lang="en">Command completed successfully</msg>

JSON:

{
    "msg": {
        "@lang": "en",
        "#text": "Command completed successfully"
    }
}

5.5. Child elements with different names

An XML element containing one or more child elements, where each child uses an unique name, MUST be mapped to a JSON object matching the name of the element. Each child element MUST be added as a key-value pair to the parent object.

XML:

<trID>
    <clTRID>ABC-12345</clTRID>
    <svTRID>54321-XYZ</svTRID>
</trID>

JSON:

{
    "trID": {
        "clTRID": "ABC-12345",
        "svTRID": "54321-XYZ"
    }
}

5.6. Child elements with identical names

An XML element containing multiple child elements, where multiple child elements use the same name, MUST be mapped to a JSON object containing an array. The name of the array MUST match the name of the non-unique children, each child element MUST be converted to JSON and added to the array.

XML:

<host>
    <addr>192.0.2.1</addr>
    <addr>192.0.2.2</addr>
</host>

JSON:

{
    "host": {
        "addr": [
            "192.0.2.1",
            "192.0.2.2"
        ]
    }
}

5.7. Child elements and contiguous text

An XML element containing one or more child elements and contiguous text, MUST be mapped to a JSON object containing a key-value entry for each child element, the text value MUST result in a key named #text.

XML:

<msg lang="en">
    Credit balance low.
    <limit>100</limit>
    <bal>5</bal>
</msg>

JSON:

{
    "msg": {
        "@lang": "en",
        "limit": 100,
        "bal": 5,
        "#text": "Credit balance low."
    }
}

When child elements are mixed with multiple text segments, the resulting #text key-value entry MUST be an array, containing all text segments.

XML:

<msg lang="en">
    Credit balance low.
    <limit>100</limit>
    <bal>5</bal>
    Please increase balance.
</msg>

JSON:

{
    "msg": {
        "@lang": "en",
        "limit": 100,
        "bal": 5,
        "#text": ["Credit balance low.", "Please increase balance asap."]
    }
}

The rules above are based on the conversion approach found on [XMLCOM-WEB]

6. Examples

This section lists examples for each of the existing EPP commands that are support by RPP.

TODO: full examples of schema conversion

6.1. Hello

The Hello request message does not exist in the context of RPP.

Example XML response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <greeting>
        <svID>Example EPP server epp.example.com</svID>
        <svDate>2000-06-08T22:00:00.0Z</svDate>
        <svcMenu>
            <version>1.0</version>
            <lang>en</lang>
            <lang>fr</lang>
            <objURI>urn:ietf:params:xml:ns:obj1</objURI>
            <objURI>urn:ietf:params:xml:ns:obj2</objURI>
            <objURI>urn:ietf:params:xml:ns:obj3</objURI>
            <svcExtension>
                <extURI>http://custom/obj1ext-1.0</extURI>
            </svcExtension>
        </svcMenu>
        <dcp>
            <access>
                <all/>
            </access>
            <statement>
                <purpose>
                    <admin/>
                    <prov/>
                </purpose>
                <recipient>
                    <ours/>
                    <public/>
                </recipient>
                <retention>
                    <stated/>
                </retention>
            </statement>
        </dcp>
    </greeting>
</epp>

Example JSON response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "greeting": {
            "svID": "Example RPP server v1.0",
            "svDate": "2000-06-08T22:00:00.0Z",
            "svcMenu": {
                "version": "1.0",
                "lang": [
                    "en",
                    "fr"
                ]
            },
            "dcp": {
                "access": {
                    "all": null
                },
                "statement": {
                    "purpose": {
                        "admin": null,
                        "prov": null
                    },
                    "recipient": {
                        "ours": null,
                        "public": null
                    },
                    "retention": {
                        "stated": null
                    }
                }
            }
        }
    }
}

6.2. Login

The Login request and response message are not used for RPP.

6.3. Logout

The Logout request and response message are not used for RPP.

6.4. Check

The Check request and responses messages are not used for RPP.

6.5. Info

The Info request message is not used for RPP.

Example XML Domain Info response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <resData>
            <domain:infData
                xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
                <domain:name>example.com</domain:name>
                <domain:roid>EXAMPLE1-REP</domain:roid>
                <domain:status s="ok"/>
                <domain:registrant>jd1234</domain:registrant>
                <domain:contact type="admin">sh8013</domain:contact>
                <domain:contact type="tech">sh8013</domain:contact>
                <domain:ns>
                    <domain:hostObj>ns1.example.com</domain:hostObj>
                    <domain:hostObj>ns1.example.net</domain:hostObj>
                </domain:ns>
                <domain:host>ns1.example.com</domain:host>
                <domain:host>ns2.example.com</domain:host>
                <domain:clID>ClientX</domain:clID>
                <domain:crID>ClientY</domain:crID>
                <domain:crDate>1999-04-03T22:00:00.0Z</domain:crDate>
                <domain:upID>ClientX</domain:upID>
                <domain:upDate>1999-12-03T09:00:00.0Z</domain:upDate>
                <domain:exDate>2005-04-03T22:00:00.0Z</domain:exDate>
                <domain:trDate>2000-04-08T09:00:00.0Z</domain:trDate>
                <domain:authInfo>
                    <domain:pw>2fooBAR</domain:pw>
                </domain:authInfo>
            </domain:infData>
        </resData>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>54322-XYZ</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Info response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "resData": {
                "domain:infData": {
                    "@xmlns:domain": "urn:ietf:params:xml:ns:domain-1.0",
                    "domain:name": "example.com",
                    "domain:roid": "EXAMPLE1-REP",
                    "domain:status": {
                        "@s": "ok"
                    },
                    "domain:registrant": "jd1234",
                    "domain:contact": [
                        {
                            "@type": "admin",
                            "#text": "sh8013"
                        },
                        {
                            "@type": "tech",
                            "#text": "sh8013"
                        }
                    ],
                    "domain:ns": {
                        "domain:hostObj": [
                            "ns1.example.com",
                            "ns1.example.net"
                        ]
                    },
                    "domain:host": [
                        "ns1.example.com",
                        "ns2.example.com"
                    ],
                    "domain:clID": "ClientX",
                    "domain:crID": "ClientY",
                    "domain:crDate": "1999-04-03T22:00:00.0Z",
                    "domain:upID": "ClientX",
                    "domain:upDate": "1999-12-03T09:00:00.0Z",
                    "domain:exDate": "2005-04-03T22:00:00.0Z",
                    "domain:trDate": "2000-04-08T09:00:00.0Z",
                    "domain:authInfo": {
                        "domain:pw": "2fooBAR"
                    }
                }
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "54322-XYZ"
            }
        }
    }
}

6.6. Poll

The Poll request message is not used for RPP.

Example XML response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1301">
            <msg>Command completed successfully; ack to dequeue</msg>
        </result>
        <msgQ count="4" id="12346">
            <qDate>2000-06-08T22:10:00.0Z</qDate>
            <msg lang="en">Credit balance low.
                <limit>100</limit>
                <bal>5</bal>
            </msg>
        </msgQ>
        <trID>
            <clTRID>ABC-12346</clTRID>
            <svTRID>54321-XYZ</svTRID>
        </trID>
    </response>
</epp>

Example JSON response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1301",
                "msg": "Command completed successfully; ack to dequeue"
            },
            "msgQ": {
                "@count": "4",
                "@id": "12346",
                "qDate": "2024-01-15T22:10:00.0Z",
                "msg": {
                    "@lang": "en",
                    "limit": "100",
                    "bal": "5",
                    "#text": "Credit balance low."
                }
            },
            "trID": {
                "clTRID": "ABC-12346",
                "svTRID": "54321-XYZ"
            }
        }
    }
}

6.7. Poll Ack

The Poll Ack request message is not used for RPP.

Example XML response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <msgQ count="0" id="12345"/>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>XYZ-12345</svTRID>
        </trID>
    </response>
</epp>

Example JSON response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "msgQ": {
                "@count": "0",
                "@id": "12345"
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "XYZ-12345"
            }
        }
    }
}

6.8. Transfer Query

The Domain Transfer Query request message is not used for RPP.

Example XML Domain Transfer Query response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <resData>
            <domain:trnData
                xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
                <domain:name>example.com</domain:name>
                <domain:trStatus>pending</domain:trStatus>
                <domain:reID>ClientX</domain:reID>
                <domain:reDate>2000-06-06T22:00:00.0Z</domain:reDate>
                <domain:acID>ClientY</domain:acID>
                <domain:acDate>2000-06-11T22:00:00.0Z</domain:acDate>
                <domain:exDate>2002-09-08T22:00:00.0Z</domain:exDate>
            </domain:trnData>
        </resData>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>54322-XYZ</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Transfer Query response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "resData": {
                "domain:trnData": {
                    "@xmlns:domain": "urn:ietf:params:xml:ns:domain-1.0",
                    "domain:name": "example.com",
                    "domain:trStatus": "pending",
                    "domain:reID": "ClientX",
                    "domain:reDate": "2000-06-06T22:00:00.0Z",
                    "domain:acID": "ClientY",
                    "domain:acDate": "2000-06-11T22:00:00.0Z",
                    "domain:exDate": "2002-09-08T22:00:00.0Z"
                }
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "54322-XYZ"
            }
        }
    }
}

6.9. Create

Example XML Domain Create request:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <command>
        <create>
            <domain:create
                xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
                <domain:name>example.com</domain:name>
                <domain:period unit="y">2</domain:period>
                <domain:ns>
                    <domain:hostObj>ns1.example.net</domain:hostObj>
                    <domain:hostObj>ns2.example.net</domain:hostObj>
                </domain:ns>
                <domain:registrant>jd1234</domain:registrant>
                <domain:contact type="admin">sh8013</domain:contact>
                <domain:contact type="tech">sh8013</domain:contact>
                <domain:authInfo>
                    <domain:pw>2fooBAR</domain:pw>
                </domain:authInfo>
            </domain:create>
        </create>
        <clTRID>ABC-12345</clTRID>
    </command>
</epp>

Example JSON Domain Create request:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "command": {
            "create": {
                "domain:create": {
                    "@xmlns:domain": "urn:ietf:params:xml:ns:domain-1.0",
                    "domain:name": "example.com",
                    "domain:period": {
                        "@unit": "y",
                        "#text": "2"
                    },
                    "domain:ns": {
                        "domain:hostObj": [
                            "ns1.example.net",
                            "ns2.example.net"
                        ]
                    },
                    "domain:registrant": "jd1234",
                    "domain:contact": [
                        {
                            "@type": "admin",
                            "#text": "sh8013"
                        },
                        {
                            "@type": "tech",
                            "#text": "sh8013"
                        }
                    ],
                    "domain:authInfo": {
                        "domain:pw": "2fooBAR"
                    }
                }
            },
            "clTRID": "ABC-12345"
        }
    }
}

Example XML Domain Create response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <resData>
            <domain:creData
                xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
                <domain:name>example.com</domain:name>
                <domain:crDate>1999-04-03T22:00:00.0Z</domain:crDate>
                <domain:exDate>2001-04-03T22:00:00.0Z</domain:exDate>
            </domain:creData>
        </resData>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>54321-XYZ</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Create response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "resData": {
                "domain:creData": {
                    "@xmlns:domain": "urn:ietf:params:xml:ns:domain-1.0",
                    "domain:name": "example.com",
                    "domain:crDate": "1999-04-03T22:00:00.0Z",
                    "domain:exDate": "2001-04-03T22:00:00.0Z"
                }
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "54321-XYZ"
            }
        }
    }
}

6.10. Delete

The Delete request message is not used for RPP.

Example XML Domain Delete response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>54321-XYZ</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Delete response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "54321-XYZ"
            }
        }
    }
}

6.11. Renew

The Renew request message is not used for RPP.

Example XML Domain Renew response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <resData>
            <domain:renData
                xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
                <domain:name>example.com</domain:name>
                <domain:exDate>2005-04-03T22:00:00.0Z</domain:exDate>
            </domain:renData>
        </resData>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>54322-XYZ</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Renew response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "resData": {
                "domain:renData": {
                    "@xmlns:domain": "urn:ietf:params:xml:ns:domain-1.0",
                    "domain:name": "example.com",
                    "domain:exDate": "2005-04-03T22:00:00.0Z"
                }
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "54322-XYZ"
            }
        }
    }
}

6.12. Transfer Request

The Transfer request message is not used for RPP.

Example XML Domain Transfer response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1001">
            <msg>Command completed successfully; action pending</msg>
        </result>
        <resData>
            <domain:trnData
                xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
                <domain:name>example.com</domain:name>
                <domain:trStatus>pending</domain:trStatus>
                <domain:reID>ClientX</domain:reID>
                <domain:reDate>2000-06-08T22:00:00.0Z</domain:reDate>
                <domain:acID>ClientY</domain:acID>
                <domain:acDate>2000-06-13T22:00:00.0Z</domain:acDate>
                <domain:exDate>2002-09-08T22:00:00.0Z</domain:exDate>
            </domain:trnData>
        </resData>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>54322-XYZ</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Transfer response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1001",
                "msg": "Command completed successfully; action pending"
            },
            "resData": {
                "domain:trnData": {
                    "@xmlns:domain": "urn:ietf:params:xml:ns:domain-1.0",
                    "domain:name": "example.com",
                    "domain:trStatus": "pending",
                    "domain:reID": "ClientX",
                    "domain:reDate": "2000-06-08T22:00:00.0Z",
                    "domain:acID": "ClientY",
                    "domain:acDate": "2000-06-13T22:00:00.0Z",
                    "domain:exDate": "2002-09-08T22:00:00.0Z"
                }
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "54322-XYZ"
            }
        }
    }
}

6.13. Transfer Cancel

The Transfer Cancel request message is not used for RPP.

Example XML Domain Cancel Transfer response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>XYZ-12345</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Cancel Transfer response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "XYZ-12345"
            }
        }
    }
}

6.14. Transfer Reject

The Transfer Reject request message is not used for RPP and the response message is the same as for the Transfer Cancel command.

6.15. Transfer Approve

The Transfer Approve request message is not used for RPP and the response message is the same as for the Transfer Cancel command.

6.16. Update

Example XML Domain Update request:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <command>
        <update>
            <domain:update
                xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
                <domain:name>example.com</domain:name>
                <domain:chg>
                    <domain:registrant>sh8013</domain:registrant>
                    <domain:authInfo>
                        <domain:pw>2BARfoo</domain:pw>
                    </domain:authInfo>
                </domain:chg>
            </domain:update>
        </update>
        <clTRID>ABC-12345</clTRID>
    </command>
</epp>

Example JSON Domain Update request:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "command": {
            "update": {
                "domain:update": {
                    "@xmlns:domain": "urn:ietf:params:xml:ns:domain-1.0",
                    "domain:name": "example.com",
                    "domain:chg": {
                        "domain:registrant": "sh8013",
                        "domain:authInfo": {
                            "domain:pw": "2BARfoo"
                        }
                    }
                }
            },
            "clTRID": "ABC-12345"
        }
    }
}

Example XML Domain Update response:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<epp
    xmlns="urn:ietf:params:xml:ns:epp-1.0">
    <response>
        <result code="1000">
            <msg>Command completed successfully</msg>
        </result>
        <trID>
            <clTRID>ABC-12345</clTRID>
            <svTRID>XYZ-12345</svTRID>
        </trID>
    </response>
</epp>

Example JSON Domain Update response:

{
    "rpp": {
        "@xmlns": "urn:ietf:params:xml:ns:epp-1.0",
        "response": {
            "result": {
                "@code": "1000",
                "msg": "Command completed successfully"
            },
            "trID": {
                "clTRID": "ABC-12345",
                "svTRID": "XYZ-12345"
            }
        }
    }
}

7. IANA Considerations

TODO

8. Internationalization Considerations

TODO

9. Security Considerations

TODO

10. Acknowledgments

TODO

11. References

11.1. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC5730]
Hollenbeck, S., "Extensible Provisioning Protocol (EPP)", STD 69, RFC 5730, DOI 10.17487/RFC5730, , <https://www.rfc-editor.org/info/rfc5730>.
[RFC5731]
Hollenbeck, S., "Extensible Provisioning Protocol (EPP) Domain Name Mapping", STD 69, RFC 5731, DOI 10.17487/RFC5731, , <https://www.rfc-editor.org/info/rfc5731>.
[RFC5732]
Hollenbeck, S., "Extensible Provisioning Protocol (EPP) Host Mapping", STD 69, RFC 5732, DOI 10.17487/RFC5732, , <https://www.rfc-editor.org/info/rfc5732>.
[RFC5733]
Hollenbeck, S., "Extensible Provisioning Protocol (EPP) Contact Mapping", STD 69, RFC 5733, DOI 10.17487/RFC5733, , <https://www.rfc-editor.org/info/rfc5733>.
[RFC8259]
Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, , <https://www.rfc-editor.org/info/rfc8259>.

11.2. Informative References

[XMLCOM-WEB]
XML.com, "Converting Between XML and JSON", , <https://www.xml.com/pub/a/2006/05/31/converting-between-xml-and-json.html>.

Authors' Addresses

Maarten Wullink
SIDN Labs
Pawel Kowalik
DENIC