Internet-Draft Packed CBOR September 2024
Bormann & Gütschow Expires 6 March 2025 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-ietf-cbor-packed-13
Published:
Intended Status:
Standards Track
Expires:
Authors:
C. Bormann
Universität Bremen TZI
M. Gütschow
TU Dresden

Packed CBOR

Abstract

The Concise Binary Object Representation (CBOR, RFC 8949 == STD 94) is a data format whose design goals include the possibility of extremely small code size, fairly small message size, and extensibility without the need for version negotiation.

CBOR does not provide any forms of data compression. CBOR data items, in particular when generated from legacy data models, often allow considerable gains in compactness when applying data compression. While traditional data compression techniques such as DEFLATE (RFC 1951) can work well for CBOR encoded data items, their disadvantage is that the recipient needs to decompress the compressed form to make use of the data.

This specification describes Packed CBOR, a simple transformation of a CBOR data item into another CBOR data item that is almost as easy to consume as the original CBOR data item. A separate decompression step is therefore often not required at the recipient.

The present version (-13) is a refresh of the implementation draft -12 with minor editorial improvements.

About This Document

This note is to be removed before publishing as an RFC.

Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-cbor-packed/.

Discussion of this document takes place on the CBOR Working Group mailing list (mailto:cbor@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/cbor/. Subscribe at https://www.ietf.org/mailman/listinfo/cbor/.

Source for this draft and an issue tracker can be found at https://github.com/cbor-wg/cbor-packed.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 6 March 2025.

Table of Contents

1. Introduction

The Concise Binary Object Representation (CBOR, [STD94]) is a data format whose design goals include the possibility of extremely small code size, fairly small message size, and extensibility without the need for version negotiation.

CBOR does not provide any forms of data compression. CBOR data items, in particular when generated from legacy data models, often allow considerable gains in compactness when applying data compression. While traditional data compression techniques such as DEFLATE [RFC1951] can work well for CBOR encoded data items, their disadvantage is that the recipient needs to decompress the compressed form to make use of the data.

This specification describes Packed CBOR, a simple transformation of a CBOR data item into another CBOR data item that is almost as easy to consume as the original CBOR data item. A separate decompression step is therefore often not required at the recipient.

This document defines the Packed CBOR format by specifying the transformation from a Packed CBOR data item to the original CBOR data item; it does not define an algorithm for a packer. Different packers can differ in the amount of effort they invest in arriving at a minimal packed form; often, they simply employ the sharing that is natural for a specific application.

Packed CBOR can make use of two kinds of optimization:

A specific application protocol that employs Packed CBOR might allow both kinds of optimization or limit the representation to item sharing only.

Packed CBOR is defined in two parts: Referencing packing tables (Section 2) and setting up packing tables (Section 3).

1.1. Terminology and Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [BCP14] (RFC2119) (RFC8174) when, and only when, they appear in all capitals, as shown here.

Original data item:

A CBOR data item that is intended to be expressed by a packed data item; the result of all reconstructions.

Packed data item:

A CBOR data item that involves packed references (packed CBOR).

Packed reference:

A shared item reference or an argument reference.

Shared item reference:

A reference to a shared item as defined in Section 2.2.

Argument reference:

A reference that combines a shared argument with a rump item as defined in Section 2.3.

Rump:

The data item contained in an argument reference that is combined with the argument to yield the reconstruction.

Straight reference:

An argument reference that uses the argument as the left-hand side and the rump as the right-hand side.

Inverted reference:

An argument reference that uses the rump as the left-hand side and the argument as the right-hand side.

Function tag:

A tag used in an argument reference for the argument (straight references) or the rump (inverted references), causing the application of a function indicated by the function tag in order to reconstruct the data item.

Packing tables:

The pair of a shared item table and an argument table.

Active set (of packing tables):

The packing tables in effect at the data item under consideration.

Reconstruction:

The result of applying a packed reference in the context of given packing tables; we speak of the reconstruction of a packed reference as that result.

The definitions of [STD94] apply. Specifically: The term "byte" is used in its now customary sense as a synonym for "octet"; "byte strings" are CBOR data items carrying a sequence of zero or more (binary) bytes, while "text strings" are CBOR data items carrying a sequence of zero or more Unicode code points (more precisely: Unicode scalar values), encoded in UTF-8 [STD63].

Where arithmetic is explained, this document uses the notation familiar from the programming language C, except that ".." denotes a range that includes both ends given, in the HTML and PDF versions, subtraction and negation are rendered as a hyphen ("-", as are various dashes), and superscript notation denotes exponentiation. For example, 2 to the power of 64 is notated: 264. In the plain-text version of this specification, superscript notation is not available and therefore is rendered by a surrogate notation. That notation is not optimized for this RFC; it is unfortunately ambiguous with C's exclusive-or and requires circumspection from the reader of the plain-text version.

Examples of CBOR data items are shown in CBOR Extended Diagnostic Notation (Section 8 of RFC 8949 [STD94] in conjunction with Appendix G of [RFC8610] ➔ possibly update to [I-D.ietf-cbor-edn-literals]).

2. Packed CBOR

This section describes the packing tables, their structure, and how they are referenced.

2.1. Packing Tables

At any point within a data item making use of Packed CBOR, there is an active set of packing tables that applies.

There are two packing tables in an active set:

  • Shared item table

  • Argument table

Without any table setup, these two tables are empty arrays. Table setup can cause these arrays to be non-empty, where the elements are (potentially themselves packed) data items. Each of the tables is indexed by an unsigned integer (starting from 0). Such an index may be derived from information in tags and their content as well as from CBOR simple values.

Table setup mechanisms (see Section 3) may include all information needed for table setup within the packed CBOR data item, or they may refer to external information. This information may be immutable, or it may be intended to potentially grow over time. This raises the question of how a reference to a new item should be handled when the unpacker uses an older version of the external information.

If, during unpacking, an index is used that references an item that is unpopulated in (e.g., outside the size of) the table in use, this MAY be treated as an error by the unpacker and abort the unpacking. Alternatively, the unpacker MAY provide the special value 1112(undefined) (the simple value >undefined< as per Section 5.7 of RFC 8949 [STD94], enclosed in the tag 1112) to the application and leave the error handling to the application. An unpacker SHOULD document which of these two alternatives has been chosen. CBOR based protocols that include the use of packed CBOR MAY require that unpacking errors are tolerated in some positions.

2.2. Referencing Shared Items

Shared items are stored in the shared item table of the active set.

The shared data items are referenced by using the reference data items in Table 1. When reconstructing the original data item, such a reference is replaced by the referenced data item, which is then recursively unpacked.

Table 1: Referencing Shared Values
reference table index
Simple value 0..15 0..15
Tag 6(unsigned integer N) 16 + 2*N
Tag 6(negative integer N) 16 - 2*N - 1

As examples, the first 22 elements of the shared item table are referenced by simple(0), simple(1), ... simple(15), 6(0), 6(-1), 6(1), 6(-2), 6(2), 6(-3). (The alternation between unsigned and negative integers for even/odd table index values — "zigzag encoding" — makes systematic use of shorter integer encodings first.)

Taking into account the encoding of these referring data items, there are 16 one-byte references, 48 two-byte references, 512 three-byte references, 131072 four-byte references, etc. As CBOR integers can grow to very large (or very negative) values, there is no practical limit to how many shared items might be used in a Packed CBOR item.

Note that the semantics of Tag 6 depend on its tag content: An integer turns the tag into a shared item reference, whereas a string or container (map or array) turns it into a straight (prefix) reference (see Table 2). Note also that the tag content of Tag 6 may itself be packed, so it may need to be unpacked to make this determination.

2.3. Referencing Argument Items

The argument table serves as a common table that can be used for argument references, i.e., for concatenation as well as references involving a function tag.

When referencing an argument, a distinction is made between straight and inverted references; if no function tag is involved, a straight reference combines a prefix out of the argument table with the rump data item, and an inverted reference combines a rump data item with a suffix out of the argument table.

Table 2: Straight Referencing (e.g., Prefix) Arguments
straight reference table index
Tag 6(rump) 0
Tag 224..255(rump) 0..31
Tag 28704..32767(rump) 32..4095
Tag 1879052288..2147483647(rump) 4096..268435455
Table 3: Inverted Referencing (e.g., Suffix) Arguments
inverted reference table index
Tag 216..223(rump) 0..7
Tag 27647..28671(rump) 8..1023
Tag 1811940352..1879048191(rump) 1024..67108863

Argument data items are referenced by using the reference data items in Table 2 and Table 3.

The tag number of the reference is used to derive a table index (an unsigned integer) leading to the "argument"; the tag content of the reference is the "rump item".

When reconstructing the original data item, such a reference is replaced by a data item constructed from the argument data item found in the table (argument, which might need to be recursively unpacked first) and the rump data item (rump, again possibly needing to be recursively unpacked).

Separate from the tag used as a reference, a tag ("function tag") may be involved to supply a function to be used in resolving the reference. It is crucial not to confuse reference tag and, if present, function tag.

A straight reference uses the argument as the provisional left-hand side and the rump data item as the right-hand side. An inverted reference uses the rump data item as the provisional left-hand side and the argument as the right-hand side.

In both cases, the provisional left-hand side is examined. If it is a tag ("function tag"), it is "unwrapped": The function tag's tag number is used to indicate the function to be applied, and the tag content is kept as the unwrapped left-hand side. If the provisional left-hand side is not a tag, it is kept as the unwrapped left-hand side, and the function to be applied is concatenation, as defined below. The right-hand side is taken as is as the unwrapped right-hand side.

If a function tag was given, the reference is replaced by the result of applying the indicated unpacking function with the left-hand side as its first argument and the right-hand side as its second. The unpacking function is defined by the definition of the tag number supplied. If that definition does not define an unpacking function, the result of the unpacking is not valid.

If no function tag was given, the reference is replaced by the left-hand side "concatenated" with the right-hand side, where concatenation is defined as in Section 2.4.

As a contrived (but short) example, if the argument table is ["foobar", h'666f6f62', "fo"], each of the following straight (prefix) references will unpack to "foobart": 6("t"), 225("art"), 226("obart") (the byte string h'666f6f62' == 'foob' is concatenated into a text string, and the last example is not an optimization).

Note that table index 0 of the argument table can be referenced both with tag 6 and tag 224, however tag 6 with an integer content is used for shared item references (see Table 1), so to combine index 0 with an integer rump, tag 224 needs to be used. The preferred encoding uses tag 6 if that is not necessary.

Taking into account the encoding and ignoring the less optimal tag 224, there is one single-byte straight (prefix) reference, 31 (25-20) two-byte references, 4064 (212-25) three-byte references, and 26843160 (228-212) five-byte references for straight references. 268435455 (228) is an artificial limit, but should be high enough that there, again, is no practical limit to how many prefix items might be used in a Packed CBOR item. The numbers for inverted (suffix) references are one quarter of those, except that there is no single-byte reference and 8 two-byte references.

2.4. Concatenation

The concatenation function is defined as follows:

  • If both left-hand side and right-hand side are arrays, the result of the concatenation is an array with all elements of the left-hand-side array followed by the elements of the right-hand side array.

  • If both left-hand side and right-hand side are maps, the result of the concatenation is a map that is initialized with a copy of the left-hand-side map, and then filled in with the members of the right-hand side map, replacing any existing members that have the same key. In order to be able to remove a map entry from the left-hand-side map, as a special case, any members to be replaced with a value of undefined (0xf7) from the right-hand-side map are instead removed, and right-hand-side members with the value undefined are never filled in into the concatenated map.

  • If both left-hand side and right-hand side are one of the string types (not necessarily the same), the bytes of the left-hand side are concatenated with the bytes of the right-hand side. Byte strings concatenated with text strings need to contain valid UTF-8 data. The result of the concatenation gets the type of the unwrapped rump data item; this way a single argument table entry can be used to build both byte and text strings, depending on what type of rump is being used.

  • If one side is one of the string types, and the other side is an array, the result of the concatenation is equivalent to the application of the "join" function (Section 4.1) to the string as the left-hand side and the array as the right-hand side. The original right-hand side of the concatenation determines the string type of the result.

  • Other type combinations of left-hand side and right-hand side are not valid.

2.5. Discussion

This specification uses up a large number of Simple Values and Tags, in particular one of the rare one-byte tags and two thirds of the one-byte simple values. Since the objective is compression, this is warranted only based on a consensus that this specific format could be useful for a wide area of applications, while maintaining reasonable simplicity in particular at the side of the consumer.

A maliciously crafted Packed CBOR data item might contain a reference loop. A consumer/decompressor MUST protect against that.

3. Table Setup

The packing references described in Section 2 assume that packing tables have been set up.

By default, both tables are empty (zero-length arrays).

Table setup can happen in one of two ways:

Where external information is used in a table setup mechanism that is not immutable, care needs to be taken so that, over time, references to existing table entries stay valid (i.e., the information is only extended), and that a maximum size of this information is given. This allows an unpacker to recognize references to items that are not yet defined in the version of the external reference that it uses, providing backward and possibly limited (degraded) forward compatibility.

For table setup, the present specification only defines two simple table-building tags, which operate by prepending to the (by default empty) tables.

3.1. Basic Packed CBOR

Two tags are predefined by this specification for packing table setup. They are defined in CDDL [RFC8610] as in Figure 1:

Basic-Packed-CBOR = #6.113([[*shared-and-argument-item], rump])
Split-Basic-Packed-CBOR =
                    #6.1113([[*shared-item], [*argument-item], rump])
rump = any
shared-and-argument-item = any
argument-item = any
shared-item = any
Figure 1: Packed CBOR in CDDL

(This assumes the allocation of tag numbers 113 ('q') and 1113 for these tags.)

The array given as the first element of the content of tag 113 ("Basic-Packed-CBOR") is prepended to both the tables for shared items and arguments that apply to the entire tag (by default empty tables). The arrays given as the first and second element of the content of the tag 1113 ("Split-Basic-Packed-CBOR") are prepended to the tables for shared items and arguments, respectively, that apply to the entire tag (by default empty tables). As discussed in the introduction to this section, references in the supplied new arrays use the new number space (where inherited items are shifted by the new items given), while the inherited items themselves use the inherited number space (so their semantics do not change by the mere action of inheritance).

The original CBOR data item can be reconstructed by recursively replacing shared and argument references encountered in the rump by their reconstructions.

4. Function Tags

Function tags that occur in an argument or a rump supply the semantics for reconstructing a data item from their tag content and the non-dominating rump or argument, respectively. The present specification defines three function tags.

4.1. Join Function Tags

Tag 106 ('j') defines the "join" unpacking function, based on the concatenation function (Section 2.4).

The join function expects an item that can be concatenated as its left-hand side, and an array of such items as its right-hand side. Joining works by sequentially applying the concatenation function to the elements of the right-hand-side array, interspersing the left-hand side as the "joiner".

An example in functional notation: join(", ", ["a", "b", "c"]) returns "a, b, c".

For a right-hand side of one or more elements, the first element determines the type of the result when text strings and byte strings are mixed in the argument. For a right-hand side of one element, the joiner is not used, and that element returned. For a right-hand side of zero elements, a neutral element is generated based on the type of the joiner (empty text/byte string for a text/byte string, empty array for an array, empty map for a map).

For an example, we assume this unpacked data item:

["https://packed.example/foo.html",
 "coap:://packed.example/bar.cbor",
 "mailto:support@packed.example"]

A packed form of this using straight references could be:

113([[106("packed.example")],
  [6(["https://", "/foo.html"]),
   6(["coap://", "/bar.cbor"]),
   6(["mailto:support@", ""])]
])

Tag 105 ('i') defines the "ijoin" unpacking function, which is exactly like that of tag 106, except that the left-hand side and right-hand side are interchanged ('i').

A packed form of the first example using inverted references and the ijoin tag could be:

113([["packed.example"],
  [216(105(["https://", "/foo.html"])),
   216(105(["coap://", "/bar.cbor"])),
   216("mailto:support@")]
])

A packed form of an array with many URIs that reference SenML items from the same place could be:

113([[105(["coaps://[2001::db8::1]/s/", ".senml"])],
  [6("temp-freezer"),
   6("temp-fridge"),
   6("temp-ambient")]
])

Note that for these examples, the implicit join semantics for mixed string-array concatenation as defined in Section 2.4, Paragraph 5 actually obviate the need for an explicit join/ijoin tag; the examples do serve to demonstrate the explicit usage of the tag.

4.2. Record Function Tag

Tag 114 ('r') defines the "record" function, which combines an array of keys with an array of values into a map.

The record function expects an array as its left-hand side, whose items are treated as key items for the resulting map, and an array of equal or shorter length as its right-hand side, whose items are treated as value items for the resulting map.

The map is constructed by grouping key and value items with equal position in the provided arrays into pairs that constitute the resulting map.

The value item array MUST NOT be longer than the key item array.

The value item array MAY be shorter than the key item array, in which case the one or more unmatched value items towards the end are treated as absent. Additionally, value items that are the CBOR simple value undefined (simple(23), encoding 0xf7) are also treated as absent. Key items whose matching value items are absent are not included in the resulting map.

For an example, we assume this unpacked data item:

[{"key0": false, "key1": "value 1", "key2": 2},
 {"key0": true, "key1": "value -1", "key2": -2},
 {"key1": "", "key2": 0}]

A straightforward packed form of this using the record function tag could be:

113([[114(["key0", "key1", "key2"])],
  [6([false, "value 1", 2]),
   6([true, "value -1", -2]),
   6([undefined, "", 0])]
])

A slightly more concise packed form can be achieved by manipulating the key item order (recall that the order of key/value pairs in maps carries no semantics):

113([[114(["key1", "key2", "key0"])],
  [6(["value 1", 2, false]),
   6(["value -1", -2, true]),
   6(["", 0])]
])

5. Tag Validity: Tag Equivalence Principle

In Section 5.3.2 of RFC 8949 [STD94], the validity of tags is defined in terms of type and value of their tag content. The CBOR Tag registry ([IANA.cbor-tags] as defined in Section 9.2 of RFC 8949 [STD94]) allows recording the "data item" for a registered tag, which is usually an abbreviated description of the top-level data type allowed for the tag content.

In other words, in the registry, the validity of a tag of a given tag number is described in terms of the top-level structure of the data carried in the tag content. The description of a tag might add further constraints for the data item. But in any case, a tag definition can only specify validity based on the structure of its tag content.

In Packed CBOR, a reference tag might be "standing in" for the actual tag content of an outer tag, or for a structural component of that. In this case, the formal structure of the outer tag's content before unpacking usually no longer fulfills the validity conditions of the outer tag.

The underlying problem is not unique to Packed CBOR. For instance, [RFC8746] describes tags 64..87 that "stand in" for CBOR arrays (the native form of which has major type 4). For the other tags defined in this specification, which require some array structure of the tag content, a footnote was added:

[...] The second element of the outer array in the data item is a native CBOR array (major type 4) or Typed Array (one of tag 64..87)

The top-down approach to handle the "rendezvous" between the outer and inner tags does not support extensibility: any further Typed Array tags being defined do not inherit the exception granted to tag number 64..87; they would need to formally update all existing tag definitions that can accept typed arrays or be of limited use with these existing tags.

Instead, the tag validity mechanism needs to be extended by a bottom-up component: A tag definition needs to be able to declare that the tag can "stand in" for, (is, in terms of tag validity, equivalent to) some structure.

E.g., tag 64..87 could have declared their equivalence to the CBOR major type 4 arrays they stand in for.

5.1. Tag Equivalence

A tag definition MAY declare Tag Equivalence to some existing structure for the tag, under some conditions defined by the new tag definition. This, in effect, extends all existing tag definitions that accept the named structure to accept the newly defined tag under the conditions given for the Tag Equivalence.

A number of limitations apply to Tag Equivalence, which therefore should be applied deliberately and sparingly:

  • Tag Equivalence is a new concept, which may not be implemented by an existing generic decoder. A generic decoder not implementing tag equivalence might raise tag validity errors where Tag Equivalence says there should be none.

  • A CBOR protocol MAY specify the use of Tag Equivalence, effectively limiting the protocol's full use to those generic encoders that implement it. Existing CBOR protocols that do not address Tag Equivalence implicitly have a new variant that allows Tag Equivalence (e.g., to support Packed CBOR with an existing protocol). A CBOR protocol that does address Tag Equivalence MAY be explicit about what kinds of Tag Equivalence it supports (e.g., only the reference tags employed by Packed CBOR and certain table setup tags).

  • There is currently no way to express Tag Equivalence in CDDL. For Packed CBOR, CDDL would typically be used to describe the unpacked CBOR represented by it; further restricting the Packed CBOR is likely to lead to interoperability problems. (Note that, by definition, there is no need to describe Tag Equivalence on the receptacle side; only for the tag that declares Tag Equivalence.)

  • The registry "CBOR Tags" [IANA.cbor-tags] currently does not have a way to record any equivalence claimed for a tag. A convention would be to alert to Tag Equivalence in the "Semantics (short form)" field of the registry.Needs to be done for the tag registrations here.

5.2. Tag Equivalence of Packed CBOR Tags

The reference tags in this specification declare their equivalence to the unpacked shared items or function results they represent.

The table setup tags 113 and 1113 declare their equivalence to the unpacked CBOR data item represented by them.

6. IANA Considerations

6.1. CBOR Tags Registry

In the registry "CBOR Tags" [IANA.cbor-tags], IANA is requested to allocate the tags defined in Table 4.

Table 4: Values for Tag Numbers
Tag Data Item Semantics Reference
6 integer (for shared); any except integer (for straight) Packed CBOR: shared/straight draft-ietf-cbor-packed
105 concatenation item (text string, byte string, array, or map) Packed CBOR: ijoin function draft-ietf-cbor-packed
106 array of concatenation item (text string, byte string, array, or map) Packed CBOR: join function draft-ietf-cbor-packed
113 array (shared-and-argument-items, rump) Packed CBOR: table setup draft-ietf-cbor-packed
114 array Packed CBOR: record function draft-ietf-cbor-packed
216..223 function tag or concatenation item (text string, byte string, array, or map) Packed CBOR: inverted draft-ietf-cbor-packed
224..255 any Packed CBOR: straight draft-ietf-cbor-packed
1112 undefined (0xf7) Packed CBOR: reference error draft-ietf-cbor-packed
1113 array (shared-items, argument-items, rump) Packed CBOR: table setup draft-ietf-cbor-packed
27647..28671 function tag or concatenation item (text string, byte string, array, or map) Packed CBOR: inverted draft-ietf-cbor-packed
28704..32767 any Packed CBOR: straight draft-ietf-cbor-packed
1811940352..1879048191 function tag or concatenation item (text string, byte string, array, or map) Packed CBOR: inverted draft-ietf-cbor-packed
1879052288..2147483647 any Packed CBOR: straight draft-ietf-cbor-packed

6.2. CBOR Simple Values Registry

In the registry "CBOR Simple Values" [IANA.cbor-simple-values], IANA is requested to allocate the simple values defined in Table 5.

Table 5: Simple Values
Value Semantics Reference
0..15 Packed CBOR: shared draft-ietf-cbor-packed

7. Security Considerations

The security considerations of [STD94] apply.

Loops in the Packed CBOR can be used as a denial of service attack, see Section 2.5.

As the unpacking is deterministic, packed forms can be used as signing inputs. (Note that if external dictionaries are added to cbor-packed, this requires additional consideration.)

8. References

8.1. Normative References

[BCP14]
Best Current Practice 14, <https://www.rfc-editor.org/info/bcp14>.
At the time of writing, this BCP comprises the following:
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[I-D.ietf-cbor-edn-literals]
Bormann, C., "CBOR Extended Diagnostic Notation (EDN)", Work in Progress, Internet-Draft, draft-ietf-cbor-edn-literals-12, , <https://datatracker.ietf.org/doc/html/draft-ietf-cbor-edn-literals-12>.
[IANA.cbor-simple-values]
IANA, "Concise Binary Object Representation (CBOR) Simple Values", <https://www.iana.org/assignments/cbor-simple-values>.
[IANA.cbor-tags]
IANA, "Concise Binary Object Representation (CBOR) Tags", <https://www.iana.org/assignments/cbor-tags>.
[RFC8610]
Birkholz, H., Vigano, C., and C. Bormann, "Concise Data Definition Language (CDDL): A Notational Convention to Express Concise Binary Object Representation (CBOR) and JSON Data Structures", RFC 8610, DOI 10.17487/RFC8610, , <https://www.rfc-editor.org/rfc/rfc8610>.
[STD94]
Internet Standard 94, <https://www.rfc-editor.org/info/std94>.
At the time of writing, this STD comprises the following:
Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", STD 94, RFC 8949, DOI 10.17487/RFC8949, , <https://www.rfc-editor.org/info/rfc8949>.

8.2. Informative References

[ARB-EXP]
Occil, P., "Arbitrary-Exponent Numbers", Specification for Registration of CBOR Tags 264 and 265, <http://peteroupc.github.io/CBOR/bigfrac.html>.
[RFC1951]
Deutsch, P., "DEFLATE Compressed Data Format Specification version 1.3", RFC 1951, DOI 10.17487/RFC1951, , <https://www.rfc-editor.org/rfc/rfc1951>.
[RFC6920]
Farrell, S., Kutscher, D., Dannewitz, C., Ohlman, B., Keranen, A., and P. Hallam-Baker, "Naming Things with Hashes", RFC 6920, DOI 10.17487/RFC6920, , <https://www.rfc-editor.org/rfc/rfc6920>.
[RFC7049]
Bormann, C. and P. Hoffman, "Concise Binary Object Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049, , <https://www.rfc-editor.org/rfc/rfc7049>.
[RFC7396]
Hoffman, P. and J. Snell, "JSON Merge Patch", RFC 7396, DOI 10.17487/RFC7396, , <https://www.rfc-editor.org/rfc/rfc7396>.
[RFC8742]
Bormann, C., "Concise Binary Object Representation (CBOR) Sequences", RFC 8742, DOI 10.17487/RFC8742, , <https://www.rfc-editor.org/rfc/rfc8742>.
[RFC8746]
Bormann, C., Ed., "Concise Binary Object Representation (CBOR) Tags for Typed Arrays", RFC 8746, DOI 10.17487/RFC8746, , <https://www.rfc-editor.org/rfc/rfc8746>.
[STD63]
Internet Standard 63, <https://www.rfc-editor.org/info/std63>.
At the time of writing, this STD comprises the following:
Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, , <https://www.rfc-editor.org/info/rfc3629>.

Appendix A. Examples

The (JSON-compatible) CBOR data structure depicted in Figure 2, 400 bytes of binary CBOR, could be packed into the CBOR data item depicted in Figure 3, 308 bytes, only employing item sharing. With support for argument sharing and the record function tag 114, the data item can be packed into 298 bytes as depicted in Figure 4. Note that this particular example does not lend itself to prefix compression, so it uses the simple common-table setup form (tag 113).

{ "store": {
    "book": [
      { "category": "reference",
        "author": "Nigel Rees",
        "title": "Sayings of the Century",
        "price": 8.95
      },
      { "category": "fiction",
        "author": "Evelyn Waugh",
        "title": "Sword of Honour",
        "price": 12.99
      },
      { "category": "fiction",
        "author": "Herman Melville",
        "title": "Moby Dick",
        "isbn": "0-553-21311-3",
        "price": 8.95
      },
      { "category": "fiction",
        "author": "J. R. R. Tolkien",
        "title": "The Lord of the Rings",
        "isbn": "0-395-19395-8",
        "price": 22.99
      }
    ],
    "bicycle": {
      "color": "red",
      "price": 19.95
    }
  }
}
Figure 2: Example original CBOR data item, 400 bytes
113([["price", "category", "author", "title", "fiction", 8.95,
                                                             "isbn"],
    /  0          1         2         3         4         5    6   /
     {"store": {
       "book": [
         {simple(1): "reference", simple(2): "Nigel Rees",
          simple(3): "Sayings of the Century", simple(0): simple(5)},
         {simple(1): simple(4), simple(2): "Evelyn Waugh",
          simple(3): "Sword of Honour", simple(0): 12.99},
         {simple(1): simple(4), simple(2): "Herman Melville",
          simple(3): "Moby Dick", simple(6): "0-553-21311-3",
          simple(0): simple(5)},
         {simple(1): simple(4), simple(2): "J. R. R. Tolkien",
          simple(3): "The Lord of the Rings",
          simple(6): "0-395-19395-8", simple(0): 22.99}],
       "bicycle": {"color": "red", simple(0): 19.95}}}])
Figure 3: Example packed CBOR data item with item sharing only, 308 bytes
113([[114(["category", "author",
           "title", simple(1), "isbn"]),
    /  0                       /
      "price", "fiction", 8.95],
    /  1        2         3    /
     {"store": {
       "book": [
           6(["reference", "Nigel Rees",
              "Sayings of the Century", simple(3)]),
           6([simple(2), "Evelyn Waugh",
              "Sword of Honour", 12.99]),
           6([simple(2), "Herman Melville",
              "Moby Dick", simple(3), "0-553-21311-3"]),
           6([simple(2), "J. R. R. Tolkien",
               "The Lord of the Rings", 22.99, "0-395-19395-8"])],
       "bicycle": {"color": "red", simple(1): 19.95}}}])
Figure 4: Example packed CBOR data item using item sharing and the record function tag, 298 bytes

The (JSON-compatible) CBOR data structure below has been packed with shared item and (partial) prefix compression only and employs the split-table setup form (tag 1113).

{
  "name": "MyLED",
  "interactions": [
    {
      "links": [
        {
          "href":
           "http://192.168.1.103:8445/wot/thing/MyLED/rgbValueRed",
          "mediaType": "application/json"
        }
      ],
      "outputData": {
        "valueType": {
          "type": "number"
        }
      },
      "name": "rgbValueRed",
      "writable": true,
      "@type": [
        "Property"
      ]
    },
    {
      "links": [
        {
          "href":
           "http://192.168.1.103:8445/wot/thing/MyLED/rgbValueGreen",
          "mediaType": "application/json"
        }
      ],
      "outputData": {
        "valueType": {
          "type": "number"
        }
      },
      "name": "rgbValueGreen",
      "writable": true,
      "@type": [
        "Property"
      ]
    },
    {
      "links": [
        {
          "href":
           "http://192.168.1.103:8445/wot/thing/MyLED/rgbValueBlue",
          "mediaType": "application/json"
        }
      ],
      "outputData": {
        "valueType": {
          "type": "number"
        }
      },
      "name": "rgbValueBlue",
      "writable": true,
      "@type": [
        "Property"
      ]
    },
    {
      "links": [
        {
          "href":
           "http://192.168.1.103:8445/wot/thing/MyLED/rgbValueWhite",
          "mediaType": "application/json"
        }
      ],
      "outputData": {
        "valueType": {
          "type": "number"
        }
      },
      "name": "rgbValueWhite",
      "writable": true,
      "@type": [
        "Property"
      ]
    },
    {
      "links": [
        {
          "href":
           "http://192.168.1.103:8445/wot/thing/MyLED/ledOnOff",
          "mediaType": "application/json"
        }
      ],
      "outputData": {
        "valueType": {
          "type": "boolean"
        }
      },
      "name": "ledOnOff",
      "writable": true,
      "@type": [
        "Property"
      ]
    },
    {
      "links": [
        {
          "href":
"http://192.168.1.103:8445/wot/thing/MyLED/colorTemperatureChanged",
          "mediaType": "application/json"
        }
      ],
      "outputData": {
        "valueType": {
          "type": "number"
        }
      },
      "name": "colorTemperatureChanged",
      "@type": [
        "Event"
      ]
    }
  ],
  "@type": "Lamp",
  "id": "0",
  "base": "http://192.168.1.103:8445/wot/thing",
  "@context":
   "http://192.168.1.102:8444/wot/w3c-wot-td-context.jsonld"
}
Figure 5: Example original CBOR data item, 1210 bytes
1113([/shared/["name", "@type", "links", "href", "mediaType",
            /  0       1       2        3         4 /
    "application/json", "outputData", {"valueType": {"type":
         /  5               6               7 /
    "number"}}, ["Property"], "writable", "valueType", "type"],
               /   8            9           10           11 /
   /argument/ ["http://192.168.1.10", 6("3:8445/wot/thing"),
              / 6                        225 /
   225("/MyLED/"), 226("rgbValue"), "rgbValue",
     / 226             227           228     /
   {simple(6): simple(7), simple(9): true, simple(1): simple(8)}],
     / 229 /
   /rump/ {simple(0): "MyLED",
           "interactions": [
   229({simple(2): [{simple(3): 227("Red"), simple(4): simple(5)}],
    simple(0): 228("Red")}),
   229({simple(2): [{simple(3): 227("Green"), simple(4): simple(5)}],
    simple(0): 228("Green")}),
   229({simple(2): [{simple(3): 227("Blue"), simple(4): simple(5)}],
    simple(0): 228("Blue")}),
   229({simple(2): [{simple(3): 227("White"), simple(4): simple(5)}],
    simple(0): "rgbValueWhite"}),
   {simple(2): [{simple(3): 226("ledOnOff"), simple(4): simple(5)}],
    simple(6): {simple(10): {simple(11): "boolean"}}, simple(0):
    "ledOnOff", simple(9): true, simple(1): simple(8)},
   {simple(2): [{simple(3): 226("colorTemperatureChanged"),
    simple(4): simple(5)}], simple(6): simple(7), simple(0):
    "colorTemperatureChanged", simple(1): ["Event"]}],
     simple(1): "Lamp", "id": "0", "base": 225(""),
     "@context": 6("2:8444/wot/w3c-wot-td-context.jsonld")}])
Figure 6: Example packed CBOR data item, 505 bytes

Acknowledgements

CBOR packing was part of the original proposal that turned into CBOR, but did not make it into [RFC7049], the predecessor of RFC 8949 [STD94]. Various attempts to come up with a specification over the years did not proceed. In 2017, Sebastian Käbisch proposed investigating compact representations of W3C Thing Descriptions, which prompted the author to come up with what turned into the present design.

This work was supported in part by the German Federal Ministry of Education and Research (BMBF) within the project Concrete Contracts.

Authors' Addresses

Carsten Bormann
Universität Bremen TZI
Postfach 330440
D-28359 Bremen
Germany
Mikolai Gütschow
TUD Dresden University of Technology
Helmholtzstr. 10
D-01069 Dresden
Germany