# /etc/conf.d/distccd: config file for /etc/init.d/distccd

DISTCCD_OPTS=""

# this is the distccd executable
DISTCCD_EXEC="/usr/bin/distccd"

# set this option to run distccd with extra parameters
# Default port is 3632.  For most people the default is okay.
DISTCCD_OPTS="${DISTCCD_OPTS} --port 3632"

# Logging
# You can change some logging options here:
# --log-file FILE
# --log-level LEVEL  [critical,error,warning, notice, info, debug]
#
# Leaving --log-file blank will log to syslog
# example: --log-file /dev/null --log-level warning
# example: --log-level critical

DISTCCD_OPTS="${DISTCCD_OPTS} --log-level critical"

# SECURITY NOTICE:
# It is HIGHLY recommended that you use the --listen option
# for increased security. You can specify an IP to permit connections
# from or a CIDR mask
# --listen accepts only a single IP
# --allow is now mandatory as of distcc-2.18.
# example:  --allow 192.168.0.0/24
# example:  --allow 192.168.0.5 --allow 192.168.0.150
# example:  --listen 192.168.0.2
DISTCCD_OPTS="${DISTCCD_OPTS} --allow 192.168.0.0/24"
#DISTCCD_OPTS="${DISTCCD_OPTS} --listen 192.168.0.2"

# set this for niceness
# Default is 15
DISTCCD_OPTS="${DISTCCD_OPTS} -N 15"

# By default distccd stores temporary files in /tmp
# Make sure to give distcc user write permission to
# the given TMPDIR
#TMPDIR="/tmp"